Товары — Освещение и иллюминация

Rear Light for Vehicles RUF.09-02

Фонарь задний РУФС.09-02

₽2 500-4 000
ООО "СТЕКЛО-СЕРВИС" 🇷🇺
Rear Light for Vehicles RUF.S.09

Фонарь задний РУФС.09

₽1 500-3 000
ООО "СТЕКЛО-СЕРВИС" 🇷🇺
Rear Light for Vehicles RUFS.09-12

Фонарь задний РУФС.09-12

₽1 500-2 500
ООО "СТЕКЛО-СЕРВИС" 🇷🇺
Rear Light RUFS.09-01 for Vehicles

Фонарь задний РУФС.09-01

₽1 500-2 500
ООО "СТЕКЛО-СЕРВИС" 🇷🇺

Разместите заявку на закупку

Получите предложения от проверенных поставщиков

Экономьте время
NCU 16 Street Lighting Fixture for Outdoor Use

Светильник НКУ 16-300-500-003

₽15 000-25 000
ООО "СТЕКЛО-СЕРВИС" 🇷🇺
Street Lighting Fixture NCU 21-100-250-001

Светильник НКУ 21-100-250-001

₽2 500-4 000
ООО "СТЕКЛО-СЕРВИС" 🇷🇺
High-Pressure Discharge Street Light JKU 21-70-001

Светильник ЖКУ 21-70-001

₽3 500-5 000
ООО "СТЕКЛО-СЕРВИС" 🇷🇺
High-Pressure Discharge Street Light RKU 16-400-003

Светильник РКУ 16-400-003

₽15 000-25 000
ООО "СТЕКЛО-СЕРВИС" 🇷🇺
Street Lighting Fixture NKU 16-300-500-001

Светильник НКУ 16-300-500-001

₽15 000-25 000
ООО "СТЕКЛО-СЕРВИС" 🇷🇺
High-Pressure Discharge Street Light RKU 16-400-001

Светильник РКУ 16-400-001

₽15 000-25 000
ООО "СТЕКЛО-СЕРВИС" 🇷🇺
High-Pressure Discharge Street Light GKU 21-250-001

Светильник ГКУ 21-250-001

₽3 500-5 000
ООО "СТЕКЛО-СЕРВИС" 🇷🇺
LED Street Light 40W DKU 20-40-027M SMART WAY

Светильник ДКУ 20-40-027М SMART WAY

₽3 500-5 000
ООО "СТЕКЛО-СЕРВИС" 🇷🇺
NKU 16 Street and Tunnel Lighting Fixture 100W 3000K

Светильник НКУ 16-100-300-001

₽5 000-15 000
ООО "СТЕКЛО-СЕРВИС" 🇷🇺
High-Pressure Discharge Street Light ЖКУ 16-70-002

Светильник ЖКУ 16-70-002

₽15 000-25 000
ООО "СТЕКЛО-СЕРВИС" 🇷🇺
High-Pressure Discharge Street Light RKU 16-125-001

Светильник РКУ 16-125-001

₽5 000-8 000
ООО "СТЕКЛО-СЕРВИС" 🇷🇺
LED Street Light DKU 20-120-005M FORMULA OF LIGHT

Светильник ДКУ 20-120-005М ФОРМУЛА СВЕТА

₽15 000-25 000
ООО "СТЕКЛО-СЕРВИС" 🇷🇺
High-Pressure Discharge Street Light GKU 16-100-001

Светильник ГКУ 16-100-001

₽15 000-25 000
ООО "СТЕКЛО-СЕРВИС" 🇷🇺

Часто задаваемые вопросы

•Can I get photometric files to run my own lighting calculations?
Yes. Street, industrial and commercial fixtures come with IES or LDT photometric files measured in accredited laboratories, so your designer can model the installation in DIALux or Relux before ordering. Suppliers will also run the calculation for you if you send road geometry or hall dimensions — a free service on serious volume enquiries.
•How do these fixtures handle unstable voltage and power surges?
This is a core design requirement in the home market. Drivers typically accept wide input ranges and fixtures for street use are offered with built-in surge protection of 4–10 kV. If your grid suffers regular spikes or sags, state it in the request — suppliers will specify driver and SPD options accordingly rather than quoting the base model.
•What warranty applies and how are failures handled at distance?
Street and industrial lines typically carry 3–5 year warranties, written into the contract. Practical handling: failed units are diagnosed by photo and serial number, and replacements or repair components ship with the next order. For municipal lots, agree a small on-site spare stock — 1–2 percent of fixtures — as part of the delivery.
•Are explosion-proof fixtures certified for oil and gas sites?
Explosion-proof LED fixtures carry Ex certification under EAEU technical regulation TR CU 012, with zone classes and protection types marked on the housing. The 123 listings here cover zones for gas and dust atmospheres. Check with your site operator whether EAEU Ex certificates are accepted directly or require local validation — practice varies by country.
•What is the realistic landed lead time for a street lighting project?
Stock models ship in 1–2 weeks; project quantities with specific optics, brackets and surge options are produced in 3–6 weeks. Add 7–14 days by truck to Central Asia, or 25–45 days by sea to the Gulf, Africa or Latin America. For phased municipal projects, suppliers schedule monthly shipments against an annual contract.
•Can fixtures be supplied under our brand for the local market?
Private labelling is widely available: your logotype on the housing, packaging and documentation, usually from a few hundred units per model. The EAC certification stays in the manufacturer's name, and warranty obligations are defined between you and the factory in the supply contract, so the arrangement remains clean for customs and after-sales.