Товарлар — Болоттон жасалган
Connecting Fitting for Secure Pipe Connections 2x2x2.5 cm ETNA Volga
сом 26.10-208.80
Krasnaya Etna PJSC 🇷🇺
Chain Stopper for Anchor Chains Type 1, Made of Alloy Steel, Suitable for Reinforced Chains
сом 261-1,566
Krasny Yakor OJSC 🇷🇺
End Link for Anchor Chains Made of Low-Magnetic Steel 34MM with Counterforts
сом 261-1,566
Krasny Yakor OJSC 🇷🇺
Square and Round Steel Blanks for Locomotive Axles and Seamless Pipes
сом 52,200-522,000
EVRAZ NTMK OJSC 🇷🇺
Corrugated Spiral Steel Pipes for Drainage and Construction
сом 783-5,220
KTC METALLKONSTRUKTSIYA OJSC 🇷🇺
Honeycomb Glass Fiber Composite SSP-1-8T
сом 261-2,088
OJSC "ONPP "TECHNOLOGY" IM. A.G. ROMASHINA" 🇷🇺
Hot-Rolled Round Bar B1-IV-ND-80 GOST 2590-2006 / 38HS-2GP GOST 4543-2016
сом 78.30-313.20
AROVANA LLC 🇷🇺
Hot-Rolled Alloyed Flat Steel Sheets, 600mm Width, >10mm Thickness
сом 36,540-156,600
PJSC SEVERSTAL 🇷🇺
Hot-Rolled Unalloyed Flat Steel, Width Under 600mm, Thickness 4.75mm or More
сом 26,100-156,600
PJSC SEVERSTAL 🇷🇺
Continuous Cast Slab of Unalloyed Steel with Less Than 0.25% Carbon
сом 20,880-62,640
PJSC SEVERSTAL 🇷🇺
SBR Butadiene-Styrene Rubber for Industrial Applications
сом 78.30-313.20
Voronezhsintezkauchuk OJSC 🇷🇺
Metal Bridge Sections for Road, Rail, and Pedestrian Construction
сом 52,200-5,220,000
BZMMK OJSC named after V.A. Sklyarenko 🇷🇺
Hydrophobic Agent for Facade and Foundation Treatment GLIMS FobosGrunt, 1 kg
сом 261-835.20
GLIMS-PRODUCTION OJSC 🇷🇺
U-shaped Suspended Profile BSUF 7-000, 70x50x200 mm to 70x50x2000 mm, 3.0 mm Steel
сом 261-1,566
SZ EMI OJSC 🇷🇺
FAQ
•How do GOST steel grades correspond to EN and ASTM grades?
Published equivalence tables cover the common structural range: St3sp corresponds approximately to S235, 09G2S to S355 in many applications, and alloy grades have ASTM near-equivalents. Because matches are approximate, suppliers provide the chemical composition and mechanical properties from mill certificates so your engineer confirms suitability rather than relying on the name alone.
•What is the minimum tonnage worth shipping?
For commodity rolled product, 20 tonnes — one container or truck — is the practical floor per position, and vessel parcels of 500–3,000 tonnes get mill-direct pricing. Fabricated structures are different: a single bridge section or a set of galvanised columns can justify shipment because value per tonne is higher.
•Can plants fabricate structures to Eurocode or AISC project drawings?
Yes, fabrication shops work from your drawings regardless of the design code, since cutting, welding and drilling follow the geometry and weld specifications you provide. Welder certification and weld inspection protocols are issued per Russian standards; if your project requires specific NDT coverage or third-party inspection, write it into the contract.
•Is hot-dip galvanising available, and to what standard?
Most fabricators either operate or partner with galvanising lines running to GOST 9.307, which is harmonised with ISO 1461 in coating thickness requirements. Specify the design life or coating microns you need; typical structural coatings run 60–100 microns. Coating thickness measurement protocols ship with the goods.
•How is mixed steel cargo loaded — containers or breakbulk?
Bars, profiles and sheet up to 11.8 metres fit 40-foot containers; longer beams and large fabrications travel breakbulk or on flat-racks. Suppliers and forwarders decide per cargo list, balancing handling damage risk against freight cost. For Central Asia, open rail wagons are usually the cheapest route for long product.