Товарлар — Жасалгалоо жана фасад материалдары
Protective Coatings for Technological Containers Against Contamination and Mechanical Damage
сом 7.83-52.20
DAOCHU LLC 🇷🇺
Wood Antiseptic Concentrate "Wood Doctor" Mark-5 Universal
сом 130.50-417.60
LOVIN-OGNEZASHCHITA LLC 🇷🇺
Post your Buy Requirement
Get Quotes from Verified Suppliers
Убакытты үнөмдөңүз
High-Performance Antiseptic Treatment for Concrete - Nortex-Lux 2.8kg
сом 261-835.20
NPO NORTH LLC 🇷🇺
Wood Protection Solution II Grade BB-11 GOST 28815-2018 with Indicator
сом 261-835.20
EMPILS CJSC 🇷🇺
Most Popular
in Жасалгалоо жана фасад материалдары
345+ Products
1
2
3
Door Handle RD-002 Lacquered 175mm Birch
сом 104.40-522
FSIN of Russia for Novgorod Oblast Correctional Labor Institution No. 3 🇷🇺
Beta-Propylactone - Medical Blood Sterilization and Fumigant
сом 783-3,132
ENGINEERING CHEMICAL-TECHNOLOGICAL CENTER LLC 🇷🇺
PF-115 "Siver" Enamel for Interior and Exterior Use
сом 130.50-365.40
SAIVER Shelanger Chemical Plant OJSC 🇷🇺
FAQ
•Will these coatings perform in hot and humid climates?
Most facade paints and protective compounds in this section are formulated for severe continental conditions and carry UV and moisture resistance data in their technical sheets. For tropical coastal use, ask the manufacturer to confirm performance against your humidity and salt-spray requirements; several plants adjust formulations for specific export climates.
•What shelf life do paints and treatments have for sea shipment?
Water-dispersion paints typically carry 12–24 months shelf life, solvent-based and silicate products up to 24–36 months in unopened factory packaging. A sea voyage of 30–45 days is not a problem if cargo avoids freezing; suppliers mark temperature limits on each pallet and can schedule shipments around extreme seasons.
•Can I get fire-protection certificates recognised in my country?
Products ship with Russian fire-efficiency test reports and GOST conformity documents stating flame-spread group and treatment class. These are usually sufficient for tender pre-qualification, but final acceptance depends on your national regulator. Manufacturers can support local re-certification by providing formulation data and additional test samples.
•Is private-label production available for distributors?
Yes, this is common practice for paints, primers, wood treatments and rust converters. Typical thresholds start around one tonne per SKU per filling run. The factory prints your label artwork, while the certificate of conformity continues to reference the manufacturing plant, which keeps documentation legitimate.
•How are decorative mouldings and cornices packed for export?
Long profiles are wrapped individually, boxed and strapped to custom-length pallets or packed in plywood crates for sea freight. Breakage allowances of 2–3 percent are normally written into the contract for gypsum and polymer decorative elements, and suppliers add spare pieces to cover transit damage.