产品 — 换热器与热泵
APOРА Heat Exchanger SH19 129/18 6.0 304/316L H TУ 28.25.11-001-50201614-23
¥10,800-43,200
APORA LLC 🇷🇺
Plate Heat Exchanger for Thermal Processing of Liquid Food Products (VG Type)
¥10,800-129,600
SLAVUTICH LLC 🇷🇺
Heat Exchanger for Raw/Bottom Product of Catalytic Column T-102 Black 500 TPG-4.0-M1/20G-5-T-2 00.000
¥64,800-259,200
KURGANHIMMASH LLC 🇷🇺
Shell-and-Tube Heat Exchangers TN Type for Thermal Applications
¥21,600-432,000
DIMITROVGRADKHIMMASH OJSC 🇷🇺
Heat Exchanger for Hydrocracking Residue T-310 A,B Black TN 5095-2019-000
¥64,800-259,200
KURGANHIMMASH LLC 🇷🇺
Combined Heat Exchanger for Hydraulic System and Engine Cooling 051A-1301005-20
¥648-2,160
SHAAZ OJSC 🇷🇺
High-Pressure Heat Exchangers, TU 3612-664-05754941-2016
¥302,400-1,296,000
SALAVATNEFTEMASH OJSC 🇷🇺
Plate Heat Exchangers with Surface Area from 0.016 to 2000 m²
¥21,600-1,296,000
GMS Neftmash OJSC 🇷🇺
Raw Material Heater T-101A Black 400 TPG-2.5-M1/25G-2-T-2 00.000
¥21,600-129,600
KURGANHIMMASH LLC 🇷🇺
Gas-Condensate Heat Exchanger Block T-203-5, T-203-6 BK-15.0/8.0-1000-3
¥64,800-216,000
KURGANHIMMASH LLC 🇷🇺
常见问题
•What information do I need to provide for a quotation?
Four things: the two media (for example water/water or steam/oil), inlet and outlet temperatures on both sides, flow rates, and maximum working pressure. With these, the factory runs a thermal calculation and proposes a specific plate pack or tube bundle with documented performance margins.
•Can a Russian plate exchanger replace an existing European unit?
In most cases yes, as a functional replacement matched to the same duty point and connection sizes. Suppliers do not copy proprietary plates, but they will size an equivalent unit and adapt flange positions where possible. Send the old unit's datasheet or nameplate photo for the fastest match.
•What about gaskets and spare plates later on?
Gaskets and plates for the supplier's own models are stocked at the factory and ship worldwide by courier. A prudent practice for remote sites is ordering a gasket set and several spare plates with the unit itself — the added cost is small compared with downtime.
•Are the exchangers pressure-tested and documented?
Yes. Units are hydraulically tested at the plant and shipped with a technical passport recording test pressure, materials and serial number, plus an EAC declaration where applicable. For oil and gas or municipal tenders, additional weld and material certificates can be arranged at order stage.
•How fast can a custom-calculated unit be delivered?
Typical production time is 20 to 45 days after the thermal calculation is approved, depending on size and materials. Small brazed units often ship from stock. Add roughly two weeks of trucking to Central Asia or four to six weeks of sea freight to the Gulf, Africa or Latin America.