产品 — 钢材与金属制品
Mobile Workshops for Repair and Testing of Pipeline Valves PKTBA-MM
¥648,000-2,160,000
PKTBA CJSC 🇷🇺
发布您的采购需求
从认证供应商获取报价
节省时间
最受欢迎
在 钢材与金属制品
284+ 产品
1
2
3
Meat Semi-Finished Products (Cutlets) - GOST 32951-2014
¥8.64-34.56
FC KP-14 UFSIIN of Russia in the Republic of Mordovia 🇷🇺
Frozen Fish Patties - Semi-Finished Seafood Products
¥8.64-30.24
FSIN IK-18 of the Yamalo-Nenets Autonomous Okrug 🇷🇺
Square Casting Blank in Low Alloy Steel, Carbon <0.25%, Max 130mm Side
¥3,024-12,960
PJSC SEVERSTAL 🇷🇺
Hot-Rolled Square Billet 60-220mm in Corrosion-Resistant and Heat-Resistant Steel
¥3,456-12,960
METALLURGICAL PLANT "PETROSTAL" OJSC 🇷🇺
Steel Pipes with Corrosion-Resistant Coating for Enhanced Durability 57-1020 mm
¥64.80-432
PIK LLC 🇷🇺
Hot-Bent Steel Pipe Bends for High-Pressure Applications DN 50-1400
¥2,160-43,200
LISKIMONTAZHKONSTRUKTSIYA OJSC 🇷🇺
常见问题
•How do GOST steel grades correspond to EN and ASTM grades?
Published equivalence tables cover the common structural range: St3sp corresponds approximately to S235, 09G2S to S355 in many applications, and alloy grades have ASTM near-equivalents. Because matches are approximate, suppliers provide the chemical composition and mechanical properties from mill certificates so your engineer confirms suitability rather than relying on the name alone.
•What is the minimum tonnage worth shipping?
For commodity rolled product, 20 tonnes — one container or truck — is the practical floor per position, and vessel parcels of 500–3,000 tonnes get mill-direct pricing. Fabricated structures are different: a single bridge section or a set of galvanised columns can justify shipment because value per tonne is higher.
•Can plants fabricate structures to Eurocode or AISC project drawings?
Yes, fabrication shops work from your drawings regardless of the design code, since cutting, welding and drilling follow the geometry and weld specifications you provide. Welder certification and weld inspection protocols are issued per Russian standards; if your project requires specific NDT coverage or third-party inspection, write it into the contract.
•Is hot-dip galvanising available, and to what standard?
Most fabricators either operate or partner with galvanising lines running to GOST 9.307, which is harmonised with ISO 1461 in coating thickness requirements. Specify the design life or coating microns you need; typical structural coatings run 60–100 microns. Coating thickness measurement protocols ship with the goods.
•How is mixed steel cargo loaded — containers or breakbulk?
Bars, profiles and sheet up to 11.8 metres fit 40-foot containers; longer beams and large fabrications travel breakbulk or on flat-racks. Suppliers and forwarders decide per cargo list, balancing handling damage risk against freight cost. For Central Asia, open rail wagons are usually the cheapest route for long product.