محفظه تابلو روکار و توکار
تابلو برق فلزی
جعبه تقسیم
براکت و بست
تابلو پلاستیکی
تابلوهای ورودی و توزیع اصلی
جعبه ترمینال
تابلو کنتور و طبقه
لوازم تابلو
جعبههای مسیر و توزیع
شینه پیشساخته
مقره و یراق نگهدارنده
لوازم سینی کابل
سازماندهنده و داکت کابل
محفظههای کوچک
درپوش سینی کابل
سینی کابل نردبانی
سینی کابل مستقیم
سینی کابل گوشه
زانوی سینی کابل
پروفیل و ریل DIN
سایر
محصولات — محفظه و قاببندی
لوله سه راهی گلابی ONL 000x000 GT، با ابعاد از 100x40 میلیمتر تا 600x110 میلیمتر، با ضخامت فلز از 1.0 میلیمتر تا
﷼ 126,000-756,000
SZ EMI OJSC 🇷🇺
Vertical T-Tray for Cable Lines ONL 000x000 TY, 100x40mm - 600x200mm
﷼ 126,000-1,260,000
SZ EMI OJSC 🇷🇺
Radius Three-Way Cable Tray ONL 000x000 TR15 for Horizontal Cable Distribution
﷼ 378,000-2,520,000
SZ EMI OJSC 🇷🇺
لوله سه راهی عمودی به سمت بالا با چرخش ONL 000x000 TW، با ابعاد از 100x40 میلیمتر تا 600x200، با ضخامت می
﷼ 378,000-2,520,000
SZ EMI OJSC 🇷🇺
سینی سه راهی تقویت شده UPL 000x00 T، با ابعاد خارجی از 150x75 میلیمتر تا 600x120 میلیمتر، با ضخامت فلز از 1.2 میلیمتر تا
﷼ 378,000-2,520,000
SZ EMI OJSC 🇷🇺
سینی سه راهی عمودی به سمت بالا ONL 000x000 TU ، با ابعاد خارجی از 100x40 میلیمتر تا 600x200 میلیمتر ، با ضخامت فلز از
﷼ 126,000-1,260,000
SZ EMI OJSC 🇷🇺
سینی صلیبی ONL 000x000 X، با ابعاد از 100x40 میلیمتر تا 600x200 میلیمتر، با ضخامت فلز از 1.0 میلیمتر تا 2.0 میلیمتر، اوسی
﷼ 126,000-1,260,000
SZ EMI OJSC 🇷🇺
سینی گوشهای افقی تقویت شده سری UPL 000x00 U90 با ابعاد کلی از 150x75 میلیمتر تا 600x120 میلیمتر، ضخامت فلز
﷼ 378,000-2,520,000
SZ EMI OJSC 🇷🇺
لوله زاویهای شعاعی عمودی داخلی 90 درجه ONL 000x000 F90R15 ، با ابعاد 100x40 میلیمتر تا 600
﷼ 378,000-2,520,000
SZ EMI OJSC 🇷🇺
لوله انشعابی ONL 000x000 O، با ابعاد از 100x40 میلیمتر تا 600x200، با ضخامت فلز از 1.0 میلیمتر تا 2.0 میلیمتر، با
﷼ 75,600-756,000
SZ EMI OJSC 🇷🇺
CLN10-050-400-3-M-HDZ ESCA لوله غیرپرفور شده 50x400x3000 HDZ IEK
﷼ 75,600-252,000
IEK Holding LLC 🇷🇺
CLN10-050-150-055-3 ESCA لوله غیر سوراخدار 50x150x3000-0.55 IEK
﷼ 176,400-504,000
IEK Holding LLC 🇷🇺
FAQ
•Can cabinets be produced in non-catalogue dimensions?
Yes, and with modest minimums — sheet-metal shops here treat custom sizes as ordinary work. Provide height, width, depth, IP rating, door and lock type, and required cutouts or mounting plates. Tooling charges are rare for standard bending and punching; a custom batch of 10–50 cabinets is normal, with drawings approved before production.
•What corrosion protection should I choose for coastal or humid sites?
For outdoor and coastal installation, choose hot-dip galvanising after fabrication for trays and fittings, or powder coating over zinc-primed steel for cabinets; stainless executions are available for the harshest sites. State the environment in your request — suppliers will recommend a finish and provide coating thickness measurements with the shipment.
•How is freight cost controlled for bulky but light cargo like trays?
Trays and covers nest inside each other and ship strapped in compact bundles, and many cabinet models travel flat-packed for on-site assembly. Suppliers calculate container utilisation before invoicing, so you see real cubic economics. As a rule, a 40-foot container absorbs a mid-sized commercial project's complete tray and enclosure schedule.
•Are enclosure IP ratings backed by test documents?
Yes. IP31 through IP65 ratings are confirmed by test protocols under the GOST 14254 standard, which is identical in method to IEC 60529. EAC declarations and test reports ship with the goods and are generally sufficient for project documentation and tender technical files in most importing countries.
•Do suppliers stock matching hardware — covers, partitions, connectors?
The system approach is standard: each tray family includes its covers, partitions, connectors, fasteners and brackets, and suppliers complete your bill of materials to avoid site mismatches. If you mix tray brands in an existing facility, send dimensions and the factory will confirm interface compatibility or supply adapter pieces.