محفظه تابلو روکار و توکار
تابلو برق فلزی
جعبه تقسیم
براکت و بست
تابلو پلاستیکی
تابلوهای ورودی و توزیع اصلی
جعبه ترمینال
تابلو کنتور و طبقه
لوازم تابلو
جعبههای مسیر و توزیع
شینه پیشساخته
مقره و یراق نگهدارنده
لوازم سینی کابل
سازماندهنده و داکت کابل
محفظههای کوچک
درپوش سینی کابل
سینی کابل نردبانی
سینی کابل مستقیم
سینی کابل گوشه
زانوی سینی کابل
پروفیل و ریل DIN
سایر
محصولات — محفظه و قاببندی
CPG01-0-45-100-400-HDZ چرخش نرم ۴۵ درجه نوع G01 ESCA ۱۰۰×۴۰۰ میلیمتر HDZ IEK
﷼ 75,600-252,000
IEK Holding LLC 🇷🇺
CPG01-0-90-100-600 ESCA زوایه نرم 90 درجه نوع G01 100x600mm IEK
﷼ 378,000-1,260,000
IEK Holding LLC 🇷🇺
CLP3N-100-500 ESCA چرخش عمودی خارجی ۴۵ درجه ۱۰۰×۵۰۰ میلیمتر IEK
﷼ 126,000-756,000
IEK Holding LLC 🇷🇺
CPG01-0-45-100-300-HDZ چرخش نرم ۴۵ درجه نوع G01 ESCA ۱۰۰×۳۰۰ میلیمتر HDZ IEK
﷼ 63,000-201,600
IEK Holding LLC 🇷🇺
فاصل کانالهای زاویهای LL 000 RLU, ابعاد 30x1200 تا 180x1200 میلیمتر
﷼ 63,000-756,000
SZ EMI OJSC 🇷🇺
Adjustable Horizontal Tray ONL 000x000 HL (100x40mm to 600x200mm)
﷼ 378,000-2,520,000
SZ EMI OJSC 🇷🇺
Cross-shaped G-shaped Tray ONL 000x000 GX, Dimensions 100x40mm to 600x110mm
﷼ 126,000-756,000
SZ EMI OJSC 🇷🇺
سینی سه راهی ONL 000x000 T، با ابعاد از 100x40 میلیمتر تا 600x200 میلیمتر، با ضخامت فلز از 1.0 میلیمتر تا 2.0 میلیمتر، گور
﷼ 126,000-1,260,000
SZ EMI OJSC 🇷🇺
سینی سهراهی عمودی به سمت بالا ONL 000x000 TU ، با ابعاد از 100x40 میلیمتر تا 600x200 میلیمتر، با ضخامت فلز از
﷼ 126,000-1,260,000
SZ EMI OJSC 🇷🇺
تفکیک کننده لوله های زاویه دار از نوع پله ای LL 000 RLU، با ابعاد از 30x1200 میلی متر تا 180x1200 میلی متر، با ضخامت از 1.2
﷼ 50,400-756,000
SZ EMI OJSC 🇷🇺
لوله تقویت شده صلیبی UPL 000x000 X با ابعاد از 150x75 میلیمتر تا 600x120 میلیمتر و ضخامت فلز از 1.2 میلیمتر
﷼ 378,000-2,520,000
SZ EMI OJSC 🇷🇺
لوله زاویهای عمودی به سمت پایین با چرخش به سمت چپ ONL 000x000 DL
﷼ 126,000-1,260,000
SZ EMI OJSC 🇷🇺
FAQ
•Can cabinets be produced in non-catalogue dimensions?
Yes, and with modest minimums — sheet-metal shops here treat custom sizes as ordinary work. Provide height, width, depth, IP rating, door and lock type, and required cutouts or mounting plates. Tooling charges are rare for standard bending and punching; a custom batch of 10–50 cabinets is normal, with drawings approved before production.
•What corrosion protection should I choose for coastal or humid sites?
For outdoor and coastal installation, choose hot-dip galvanising after fabrication for trays and fittings, or powder coating over zinc-primed steel for cabinets; stainless executions are available for the harshest sites. State the environment in your request — suppliers will recommend a finish and provide coating thickness measurements with the shipment.
•How is freight cost controlled for bulky but light cargo like trays?
Trays and covers nest inside each other and ship strapped in compact bundles, and many cabinet models travel flat-packed for on-site assembly. Suppliers calculate container utilisation before invoicing, so you see real cubic economics. As a rule, a 40-foot container absorbs a mid-sized commercial project's complete tray and enclosure schedule.
•Are enclosure IP ratings backed by test documents?
Yes. IP31 through IP65 ratings are confirmed by test protocols under the GOST 14254 standard, which is identical in method to IEC 60529. EAC declarations and test reports ship with the goods and are generally sufficient for project documentation and tender technical files in most importing countries.
•Do suppliers stock matching hardware — covers, partitions, connectors?
The system approach is standard: each tray family includes its covers, partitions, connectors, fasteners and brackets, and suppliers complete your bill of materials to avoid site mismatches. If you mix tray brands in an existing facility, send dimensions and the factory will confirm interface compatibility or supply adapter pieces.