产品 — 钢材与金属制品
Double Profile BSUP 5D-000, Size 50x100x200mm to 50x100x6000mm, Metal Thickness 2.0mm to 4.0mm
¥21.60-129.60
SZ EMI OJSC 🇷🇺
Plastic Window Profile for Exterior and Interior Cladding 6241-03-5403112
¥10.80-38.88
AVTOPLAST LLC 🇷🇺
Metal Product Manufacturing Bridge FKU IK-4 GUFSIN Russia Irkutsk Region
¥2,160-17,280
FSIN IK-4 of the Irkutsk Region 🇷🇺
New Jersey Barrier Block 12DD/400-0.85 (0.81)
¥302.40-1,080
HASAVYURTOVSKY REINFORCED CONCRETE AND MK PLANT LLC 🇷🇺
Lightweight Manhole Cover for Inspection Wells
¥108-345.60
FSIN IK-9 of the Republic of Bashkortostan 🇷🇺
Pine Transformable Step Ladder 0.7M
¥64.80-216
FCU IK-7 UFSI of Russia in the Republic of Karelia 🇷🇺
50x50 mm 2 mm Wire Mesh for Fencing and Construction
¥10.80-43.20
FSIN IK-15 GUFSIN of Rostov Oblast 🇷🇺
HDZ STRUT Profile Support Plate for Mounting Systems CLM50D-POS-41-25-HDZ
¥2.16-12.96
IEK Holding LLC 🇷🇺
Load-Bearing Beam S80 (L150) for Shelving (Up to 4000mm) - Pack of 2500, Light Grey 7035 Finish
¥108-302.40
MEDVED LLC 🇷🇺
常见问题
•How do GOST steel grades correspond to EN and ASTM grades?
Published equivalence tables cover the common structural range: St3sp corresponds approximately to S235, 09G2S to S355 in many applications, and alloy grades have ASTM near-equivalents. Because matches are approximate, suppliers provide the chemical composition and mechanical properties from mill certificates so your engineer confirms suitability rather than relying on the name alone.
•What is the minimum tonnage worth shipping?
For commodity rolled product, 20 tonnes — one container or truck — is the practical floor per position, and vessel parcels of 500–3,000 tonnes get mill-direct pricing. Fabricated structures are different: a single bridge section or a set of galvanised columns can justify shipment because value per tonne is higher.
•Can plants fabricate structures to Eurocode or AISC project drawings?
Yes, fabrication shops work from your drawings regardless of the design code, since cutting, welding and drilling follow the geometry and weld specifications you provide. Welder certification and weld inspection protocols are issued per Russian standards; if your project requires specific NDT coverage or third-party inspection, write it into the contract.
•Is hot-dip galvanising available, and to what standard?
Most fabricators either operate or partner with galvanising lines running to GOST 9.307, which is harmonised with ISO 1461 in coating thickness requirements. Specify the design life or coating microns you need; typical structural coatings run 60–100 microns. Coating thickness measurement protocols ship with the goods.
•How is mixed steel cargo loaded — containers or breakbulk?
Bars, profiles and sheet up to 11.8 metres fit 40-foot containers; longer beams and large fabrications travel breakbulk or on flat-racks. Suppliers and forwarders decide per cargo list, balancing handling damage risk against freight cost. For Central Asia, open rail wagons are usually the cheapest route for long product.