Калкан корпустары
Металл калкан корпустары
Бөлүштүрүү жана туташтыруу кутучалары
Кронштейндер
Пластик бокстор
Кириш-бөлүштүрүү түзмөктөрү
Клемма кутучалары
Эсеп жана кабат калкан корпустары
Калкан аксессуарлары
Жол жана кабель кутучалары
Шинопроводдор
Изоляторлор
Текче аксессуарлары
Кабель уюштургучтары
Кичине корпустар
Текче капкактары
Шаты кабель текчелери
Түз кабель текчелери
Бурчтуу кабель текчелери
Текченин бурулуштары
Профилдер жана ДИН-рейкалар
Башка
Товарлар — Корпустар жана бекемдөөлөр
MKP82-V-24-WD-41-10 Бокс ЩРВ-П-24 модуля встраив.пластик IP41 PRIME ак түп
сом 783-2,610
IEK Holding LLC 🇷🇺
MKP13-N-01-09-41-K02 Модульный корпус ЩРН-П-9 PRIME черный IP41
сом 130.50-417.60
IEK Holding LLC 🇷🇺
MKP12-N-06-40-20 KREPTA 3 Пластикалык корпус ЩРН-П-6 IP41 ак IEK
сом 156.60-626.40
IEK Holding LLC 🇷🇺
MKP12-V-12-41-G Бокс ЩРВ-П-12 модулдери үчүн пластик IP41 GENERICA
сом 261-835.20
IEK Holding LLC 🇷🇺
MKP13-V-01-18-41-K02 Модульдук корпус пл. кир. ЩРВ-П-18 PRIME кара IP41 IEK
сом 78.30-313.20
IEK Holding LLC 🇷🇺
MKP31-N-02-30-252-D KREPTA 3 Пластик корпус КМПн 1/2 IP20 дуб IEK
сом 78.30-313.20
IEK Holding LLC 🇷🇺
MKP42-N-02-30-20-S KREPTA 3 Пластикалык корпус КМПн 2/2 IP30 сосна IEK
сом 130.50-417.60
IEK Holding LLC 🇷🇺
MKP82-V-18-WD-41-10 Бокс ЩРВ-П-18 модулей встраив.пластик IP41 PRIME ак түк
сом 783-2,610
IEK Holding LLC 🇷🇺
MKP31-N-02-30-252-S KREPTA 3 Пластик корпусу КМПн 1/2 IP20 карагай IEK
сом 78.30-313.20
IEK Holding LLC 🇷🇺
MKP13-V-01-09-41-K02 Модульдук корпус пл. орнотулган ЩРВ-П-9 PRIME кара IP41 IEK
сом 78.30-313.20
IEK Holding LLC 🇷🇺
MKP82-V-04-WD-41-20 Бокс ЩРВ-П-4 модуля встраив.пластик IP41 PRIME ак түбү
сом 156.60-626.40
IEK Holding LLC 🇷🇺
FAQ
•Can cabinets be produced in non-catalogue dimensions?
Yes, and with modest minimums — sheet-metal shops here treat custom sizes as ordinary work. Provide height, width, depth, IP rating, door and lock type, and required cutouts or mounting plates. Tooling charges are rare for standard bending and punching; a custom batch of 10–50 cabinets is normal, with drawings approved before production.
•What corrosion protection should I choose for coastal or humid sites?
For outdoor and coastal installation, choose hot-dip galvanising after fabrication for trays and fittings, or powder coating over zinc-primed steel for cabinets; stainless executions are available for the harshest sites. State the environment in your request — suppliers will recommend a finish and provide coating thickness measurements with the shipment.
•How is freight cost controlled for bulky but light cargo like trays?
Trays and covers nest inside each other and ship strapped in compact bundles, and many cabinet models travel flat-packed for on-site assembly. Suppliers calculate container utilisation before invoicing, so you see real cubic economics. As a rule, a 40-foot container absorbs a mid-sized commercial project's complete tray and enclosure schedule.
•Are enclosure IP ratings backed by test documents?
Yes. IP31 through IP65 ratings are confirmed by test protocols under the GOST 14254 standard, which is identical in method to IEC 60529. EAC declarations and test reports ship with the goods and are generally sufficient for project documentation and tender technical files in most importing countries.
•Do suppliers stock matching hardware — covers, partitions, connectors?
The system approach is standard: each tray family includes its covers, partitions, connectors, fasteners and brackets, and suppliers complete your bill of materials to avoid site mismatches. If you mix tray brands in an existing facility, send dimensions and the factory will confirm interface compatibility or supply adapter pieces.