Товарлар — Танктар, идиштер жана танктар
HydroCold HC-T Series Technological Tanks over 300L to 100000L Capacity
сом 78,300-522,000
ORBITA SERVICE LLC 🇷🇺
Autonomous Septic Tank - Maintenance-Free Wastewater Treatment System
сом 15,660-313,200
AVESTPLAST LLC 🇷🇺
Horizontal Steel Underground Tank RGSP-10 - 10 m³ Capacity
сом 78,300-313,200
BEREZOVSKY TANK PLANT LLC 🇷🇺
Horizontal Steel Tanks for Oil Storage, RGS Model
сом 261,000-2,088,000
NEFTEMONTAZDIAGNOSTIKA CJSC 🇷🇺
Glycol Drainage Capacity Block ED-3/2 Black BBD(ED-3/2).00.00.000
сом 78,300-261,000
KURGANHIMMASH LLC 🇷🇺
Underground Drainage Tank for Methanol Storage EP 16-2000-1-2-GPI.00.000
сом 783,000-2,610,000
KURGANHIMMASH LLC 🇷🇺
Polymer Sewer Manholes DN/ID 1500 for Outdoor Non-Pressure Systems
сом 78,300-261,000
IKAPLAST LLC 🇷🇺
Greenlos Aero Wastewater Treatment Station with Pumping Station
сом 78,300-313,200
AGROINZHPROM LLC 🇷🇺
Polymer Access Wells for Outdoor Engineering Networks, 250-2600 mm Diameter
сом 7,830-261,000
TECHSTROI LLC 🇷🇺
Large Water Tank for Industrial Use - Baltijsky Plant Model
сом 783,000-10,440,000
BALTIYSKY ZAVOD OJSC 🇷🇺
Horizontal Underground Steel Tank for Oil Products RGSP-5, 5 m³
сом 78,300-313,200
BEREZOVSKY TANK PLANT LLC 🇷🇺
FAQ
•What information does a fabricator need to quote a custom tank?
Five things: stored medium and its temperature, working volume, orientation and installation type (underground, surface, elevated), site climate, and any internal equipment such as heating coils or mixers. With that, the plant proposes material, wall thickness and a general arrangement drawing, usually within a week, and a firm price tied to current steel cost.
•How are large tanks shipped if they exceed container dimensions?
Three routes are used. Vessels under roughly 3.2 metres diameter travel whole by truck or flat-rack. Larger tanks are fabricated in shell sections, shipped compactly, then welded on site — the plant supplies assembly drawings and can send a welding supervisor. Field-erected designs bolt or weld from panels for the biggest volumes.
•Are septic tanks and treatment plants sized for local regulations?
Suppliers size treatment equipment from your inflow data — population equivalent or daily volume and contamination levels — and guarantee outlet parameters in the contract. You then check those outlet figures against your national discharge norms. Plants regularly adjust process stages, adding tertiary treatment or disinfection, to meet stricter local limits.
•What corrosion protection is applied for underground installation?
Standard practice is abrasive blasting followed by reinforced bitumen-polymer or polyurethane external coating, with thickness measured and recorded. Internally, the lining matches the medium — from epoxy for fuels to food-grade coatings or bare stainless steel. Cathodic protection points can be welded in if your site plan uses them.
•How long does fabrication take from drawing approval?
Simple single-wall tanks up to 25 cubic metres typically take 3–5 weeks from approved drawings. Stainless process vessels, double-wall fuel tanks and packaged treatment plants run 6–10 weeks depending on complexity and internal equipment. Add transport: 1–2 weeks overland to Central Asia, 4–6 weeks by sea to the Gulf or Africa.