STRUT-профиль жана монтаж системалары
Анкерлер
Болттар
Бурамалар
Гайкалар
Жер анкерлери
Кысмалар
Заклёпкалар
Болот аркандар
Монтаждык бекиткичтер
Кронштейндер
Кабелдик кронштейндер
Башкалар
Кабелдик науалар жана аксессуарлар
Монтаждык таянычтар
Монтаждык пластиналар
Монтаждык алкактар
Аралыктоочулар
Монтаждык рейкалар
Скобалар
Монтаждык туташтыргычтар
Бекитүүчү бурчтуктар
Жыгач бурандалары
Товарлар — Илгичтер жана жабдыктар
Complete Shlamber Assembly, Galvanized Steel, 10 mm, VNT 1181 Set 1187
сом 261-1,044
VENTO-2M LLC 🇷🇺
X-Shaped Plate SMA 628, 40x120 mm, 5.0 mm Thick, AISI 304 Stainless Steel
сом 156.60-626.40
SZ EMI OJSC 🇷🇺
Perforated Suspended Rail SKЕ-000, Dimensions 41x30x200 mm to 41x30x2000 mm
сом 261-2,610
SZ EMI OJSC 🇷🇺
U-Profile Truss BSUT 8K, Dimensions 97x120 mm, Base 100x220 mm, Metal Thickness 6.0 mm
сом 261-1,566
SZ EMI OJSC 🇷🇺
Countersunk Head Bolts 90° with Cross Slot Steel 07Х16Н6-Ш O ST 1 31169-80
сом 7.83-52.20
RAM LLC 🇷🇺
L-Shaped Plate SMA 615, 40x80 mm, 5.0 mm Thickness, AISI 316L Stainless Steel
сом 130.50-522
SZ EMI OJSC 🇷🇺
Double Profile Jointed Truss BSUS 5D, 190x200x270 mm, 8 mm Stainless Steel
сом 783-3,132
SZ EMI OJSC 🇷🇺
FAQ
•Can Russian plants manufacture fasteners to my drawings or to DIN and ISO standards?
Yes. Most factories in this section run CNC and cold-heading equipment and regularly produce against customer drawings or DIN, ISO and ANSI references alongside native GOST and OST series. You supply the drawing or standard number with material and coating requirements; the plant confirms feasibility, tooling cost if any, and a unit price tied to batch size.
•What does material traceability look like for alloy-steel fasteners?
For structural and aviation-grade items, suppliers issue batch certificates referencing the steel grade, heat number and mechanical test results — tensile strength, hardness and, where required, impact toughness. This level of documentation matters for rail, energy and aerospace maintenance buyers, and it comes from the plant laboratory rather than a trading intermediary.
•Are samples available before a production order?
Routinely, yes. For catalogue items, plants send sample packs by courier free or at cost. For drawing-based parts, a paid pilot batch of 50–200 pieces is the usual route: you verify fit and coating on your side, then release the serial order against the approved sample.
•What are realistic lead times for mixed hardware orders?
Stock catalogue positions ship in 5–10 working days. Made-to-order brackets, plates and special fasteners typically need 20–40 days depending on heat treatment and coating queues. Distributors usually place consolidated quarterly orders so that long-lead items and stock lines arrive in one container.
•Which corrosion protection options are offered?
Standard options are electro-zinc plating for indoor use, hot-dip galvanising for outdoor structural hardware, and zinc-flake or special coatings for higher salt-spray requirements. State the target service environment or the salt-spray hours you need, and the plant will recommend a coating with supporting test data.