محصولات — اتصال دهنده ها و سخت افزار
X-Shaped Connecting Plate for HDZ STRUT Profile CLM50D-PXS-136-40-HDZ
﷼ 37,800-151,200
IEK Holding LLC 🇷🇺
Hydraulic Anchor Installation Tool OKS 0.2.3.114/168.516.01
﷼ 3,780,000-15,120,000
SIBBURMASH LLC 🇷🇺
CADUCEUS ALING Experience LED Backlit Mounting Frame, 4M, Art. 71304.5
﷼ 126,000-756,000
CADUCEUS LLC 🇷🇺
Reinforced Ceiling Mount for STRUT Profile HDZ IEK Model CLM50D-KPS-81-HDZ
﷼ 63,000-201,600
IEK Holding LLC 🇷🇺
Hot-Dip Galvanized Steel Plate with 3 Holes SMA 604, 40x120 mm, 5.0 mm Thickness
﷼ 63,000-201,600
SZ EMI OJSC 🇷🇺
Bolt OST 1 31185-80, OST 1 31186-80, OST 1 31188-80, OST 1 31189-80, OST 1 31190-80, OST 1 31192-80, OST 1 31193-80.
﷼ 1,260-25,200
AVIASERVIS LLC 🇷🇺
IP65 Mounting Kit for Safe Circuit Installation (TIS 34.1.3.90.000-01)
﷼ 3,780,000-15,120,000
URALTECHIS LLC 🇷🇺
Anchor Chock III - Type (side with horns, welded attachment) GOST 25056-81
﷼ 3,780,000-25,200,000
METMASH LLC 🇷🇺
CADUCEUS ALING Experience Mounting Frame with Blue LED Backlight, 6M, Screw Fixing, Art. 71306.5
﷼ 126,000-756,000
CADUCEUS LLC 🇷🇺
High-Shear Resistance Rivets with Hex Head for Composite Materials OST 1 30078-90
﷼ 5,040-25,200
NORMAL OJSC 🇷🇺
U-Profile Truss BSUT 8K, Dimensions 97x120mm, Base Size 100x220mm, Metal Thickness 6.0mm
﷼ 75,600-302,400
SZ EMI OJSC 🇷🇺
Wall Mounting Bracket for STRUT Profile HDZ IEK CLM50D-SKS-050-40-HDZ
﷼ 12,600-75,600
IEK Holding LLC 🇷🇺
FAQ
•Can Russian plants manufacture fasteners to my drawings or to DIN and ISO standards?
Yes. Most factories in this section run CNC and cold-heading equipment and regularly produce against customer drawings or DIN, ISO and ANSI references alongside native GOST and OST series. You supply the drawing or standard number with material and coating requirements; the plant confirms feasibility, tooling cost if any, and a unit price tied to batch size.
•What does material traceability look like for alloy-steel fasteners?
For structural and aviation-grade items, suppliers issue batch certificates referencing the steel grade, heat number and mechanical test results — tensile strength, hardness and, where required, impact toughness. This level of documentation matters for rail, energy and aerospace maintenance buyers, and it comes from the plant laboratory rather than a trading intermediary.
•Are samples available before a production order?
Routinely, yes. For catalogue items, plants send sample packs by courier free or at cost. For drawing-based parts, a paid pilot batch of 50–200 pieces is the usual route: you verify fit and coating on your side, then release the serial order against the approved sample.
•What are realistic lead times for mixed hardware orders?
Stock catalogue positions ship in 5–10 working days. Made-to-order brackets, plates and special fasteners typically need 20–40 days depending on heat treatment and coating queues. Distributors usually place consolidated quarterly orders so that long-lead items and stock lines arrive in one container.
•Which corrosion protection options are offered?
Standard options are electro-zinc plating for indoor use, hot-dip galvanising for outdoor structural hardware, and zinc-flake or special coatings for higher salt-spray requirements. State the target service environment or the salt-spray hours you need, and the plant will recommend a coating with supporting test data.