محفظه تابلو روکار و توکار
تابلو برق فلزی
جعبه تقسیم
براکت و بست
تابلو پلاستیکی
تابلوهای ورودی و توزیع اصلی
جعبه ترمینال
تابلو کنتور و طبقه
لوازم تابلو
جعبههای مسیر و توزیع
شینه پیشساخته
مقره و یراق نگهدارنده
لوازم سینی کابل
سازماندهنده و داکت کابل
محفظههای کوچک
درپوش سینی کابل
سینی کابل نردبانی
سینی کابل مستقیم
سینی کابل گوشه
زانوی سینی کابل
پروفیل و ریل DIN
سایر
محصولات — محفظه و قاببندی
پیمانه تقویت شده PMP 50x5، با ابعاد از 50x2000 میلیمتر تا 50x6000 میلیمتر، با ضخامت فلز 5.0 میلیمتر، گالوانیزه گرم
﷼ 126,000-756,000
SZ EMI OJSC 🇷🇺
Reinforced Light Channel KUS 000x00, Sizes 50x50x3000mm to 150x50x3000mm
﷼ 201,600-756,000
SZ EMI OJSC 🇷🇺
ترورسا پروفیل دوتایی BSUT 85D با ابعاد 220x125x150 میلیمتر و ضخامت فلز 8.0 میلیمتر، فولاد ضد زنگ نوع A
﷼ 378,000-1,260,000
SZ EMI OJSC 🇷🇺
Stainless Steel Suspension TN-R 00 for Cable Trays, Dimensions 50x200mm to 50x400mm
﷼ 50,400-252,000
SZ EMI OJSC 🇷🇺
ترورسا پروفیل دوتایی BSUT 85D، با ابعاد 220x125x150 میلیمتر، با ضخامت فلز 8.0 میلیمتر، فولاد ضد زنگ از نوع A
﷼ 378,000-1,260,000
SZ EMI OJSC 🇷🇺
کانال نورانی تقویت شده KUS 000x00، با ابعاد خارجی از 50x50x3000 میلیمتر تا 150x50x3000 میلیمتر، با ضخامت فلز از 1.5 میلیمتر، گرم
﷼ 378,000-1,512,000
SZ EMI OJSC 🇷🇺
ریل سوراخدار SK-000، با ابعاد از 41x30x140 میلیمتر تا 41x30x6000 میلیمتر، با ضخامت فلز از 2.0 میلیمتر تا 3.0 میلیمتر،
﷼ 378,000-1,512,000
SZ EMI OJSC 🇷🇺
پروفیل Z شکل PMZ 50x70، با ابعاد کلی 50x70x50 میلیمتر، با ضخامت فلز 4.0 میلیمتر، فولاد ضد زنگ از نوع AISI 304
﷼ 378,000-1,260,000
SZ EMI OJSC 🇷🇺
Reinforcing Insert THP 000x00, Stainless Steel A, 40x500 to 200x500 mm
﷼ 126,000-756,000
SZ EMI OJSC 🇷🇺
ترورسر پروفیل دوتایی BSUS 10D، با ابعاد کلی 190x270 میلیمتر، با ضخامت فلز 8.0 میلیمتر، فولاد ضد زنگ از نوع AISI
﷼ 630,000-2,016,000
SZ EMI OJSC 🇷🇺
پروفیل P-شکل PMU 32x20، با ابعاد کلی از 32x20x1000 میلیمتر تا 32x20x3000 میلیمتر، با ضخامت فلز از 2.0 میلیمتر تا 2.5 میلیمتر،
﷼ 50,400-302,400
SZ EMI OJSC 🇷🇺
ریل معلق دوگانه SKDEР-000، با ابعاد کلی از 41x60x200 میلیمتر تا 41x60x2000 میلیمتر، با ضخامت فلز
﷼ 378,000-7,560,000
SZ EMI OJSC 🇷🇺
براکت کابل سنسور راست بر روی بازوی چرخش (برای خودرو UAZ Patriot Classic) 316300384322000
﷼ 25,200-151,200
UAZ LLC 🇷🇺
پاور 90 درجه ای CPV51-0-90-100-400-HDZ نوع B10 ESCA 100x400mm HDZ
﷼ 126,000-756,000
IEK Holding LLC 🇷🇺
FAQ
•Can cabinets be produced in non-catalogue dimensions?
Yes, and with modest minimums — sheet-metal shops here treat custom sizes as ordinary work. Provide height, width, depth, IP rating, door and lock type, and required cutouts or mounting plates. Tooling charges are rare for standard bending and punching; a custom batch of 10–50 cabinets is normal, with drawings approved before production.
•What corrosion protection should I choose for coastal or humid sites?
For outdoor and coastal installation, choose hot-dip galvanising after fabrication for trays and fittings, or powder coating over zinc-primed steel for cabinets; stainless executions are available for the harshest sites. State the environment in your request — suppliers will recommend a finish and provide coating thickness measurements with the shipment.
•How is freight cost controlled for bulky but light cargo like trays?
Trays and covers nest inside each other and ship strapped in compact bundles, and many cabinet models travel flat-packed for on-site assembly. Suppliers calculate container utilisation before invoicing, so you see real cubic economics. As a rule, a 40-foot container absorbs a mid-sized commercial project's complete tray and enclosure schedule.
•Are enclosure IP ratings backed by test documents?
Yes. IP31 through IP65 ratings are confirmed by test protocols under the GOST 14254 standard, which is identical in method to IEC 60529. EAC declarations and test reports ship with the goods and are generally sufficient for project documentation and tender technical files in most importing countries.
•Do suppliers stock matching hardware — covers, partitions, connectors?
The system approach is standard: each tray family includes its covers, partitions, connectors, fasteners and brackets, and suppliers complete your bill of materials to avoid site mismatches. If you mix tray brands in an existing facility, send dimensions and the factory will confirm interface compatibility or supply adapter pieces.