Products — Electrical Safety

Joint Protection Block (Rheostatic) BSZ(R) TU 3435-004-93719333-2009

Joint Protection Block (Rheostatic) BSZ(R) TU 3435-004-93719333-2009

$90-360
PIPE SYSTEMS AND TECHNOLOGIES OJSC 🇷🇺
Modular Cathodic Protection Station Tverca-SM

Modular Cathodic Protection Station Tverca-SM

$1,500-6,000
ELTEX LLC 🇷🇺
Protective Gas Meter Cabinet "ШГС

Protective Gas Meter Cabinet "ШГС

$15-60
REMO-TECHNOLOGIES LLC 🇷🇺
Manual Fire Alarm Detector AKOR-IPR Model IL

Manual Fire Alarm Detector AKOR-IPR Model IL

$9-30
RUSSBYT LLC 🇷🇺

Post your Buy Requirement

Get Quotes from Verified Suppliers

Save Your Time
ISO-FP-DIN Short Circuit Isolator for Vesta 01F

ISO-FP-DIN Short Circuit Isolator for Vesta 01F

$3-18
NITP NITA LLC 🇷🇺
MMO Coated Subsoil Deep Anode "Mendeleevets"-OPG

MMO Coated Subsoil Deep Anode "Mendeleevets"-OPG

$90-600
CHIMSERVICE CJSC 🇷🇺
Polarized Resistance Drainage System (DRP)

Polarized Resistance Drainage System (DRP)

$300-1,800
ANOD LLC 🇷🇺
Lightning Protection Clamp K1-50Hz-02 PL

Lightning Protection Clamp K1-50Hz-02 PL

$0.90-3.60
ELMASHPOM LLC 🇷🇺
ISO-MC-IP54 Short Circuit Isolator

ISO-MC-IP54 Short Circuit Isolator

$3-18
NITP NITA LLC 🇷🇺
Protection Unit UZ-1 TU 4371-005-73591144-2013

Protection Unit UZ-1 TU 4371-005-73591144-2013

$9-36
EPOTOS-K LLC 🇷🇺
Control and Measurement Stations KIP-TES Type-1

Control and Measurement Stations KIP-TES Type-1

$150-600
TECHENERGOSNAB LLC 🇷🇺
Isolation Control System for DC Circuits - SKI-ENELT

Isolation Control System for DC Circuits - SKI-ENELT

$900-3,600
ENELT Production Company LLC 🇷🇺
Line Isolator for Communication AKOR-ILS

Line Isolator for Communication AKOR-ILS

$9-36
RUSSBYT LLC 🇷🇺
Lightning Protection Terminal K1-GTs

Lightning Protection Terminal K1-GTs

$0.30-1.80
ELMASHPOM LLC 🇷🇺
K1-100Hz-02 Lightning Protection Clamp

K1-100Hz-02 Lightning Protection Clamp

$0.90-3.60
ELMASHPOM LLC 🇷🇺
ISOLATOR FOR CABLE LOOP IZ-1 PROT. R3

ISOLATOR FOR CABLE LOOP IZ-1 PROT. R3

$1.50-6
KB POZHARNOY AVTOMATIKI LLC 🇷🇺
Surge Protection Device DTNVR 1/70/1 G (LT)

Surge Protection Device DTNVR 1/70/1 G (LT)

$9-36
HAKEL OJSC 🇷🇺
Standalone Lightning Rod Structure MOHK Type

Standalone Lightning Rod Structure MOHK Type

$900-18,000
MEGAPOLIS LLC 🇷🇺

Surge Protection, Insulators and Grounding — Electrical Safety Hardware for Harsh Grids

Networks with unstable voltage, frequent lightning and long rural lines are exactly the conditions Russian electrical-safety equipment was designed around. The category holds 433 positions from 78 manufacturers, led by surge protective devices (172 items) — the largest single group — alongside cable tray covers and protective housings (99), insulators and line hardware (52), cathodic protection for pipelines and tanks (34), circuit protection modules (26), insulation testers (24), protective relays, lightning arresters, and grounding systems.

Two things make this niche worth a buyer's attention. First, the products are engineered to GOST standards for climates from minus 60 to plus 50 degrees Celsius, with the over-dimensioned margins typical of Russian power engineering — relevant for African and Middle Eastern utilities fighting heat and surge events. Second, cathodic protection is a specialty inherited from one of the world's largest pipeline networks, and complete station packages are available, not just anodes.

  • SPD classes: Type 1/2/3 devices for distribution boards, telecom and instrumentation lines
  • Materials: porcelain, glass and polymer insulators for distribution and transmission voltages
  • Order size: typically from one packing unit; utility tenders quoted per bill of quantities
  • Terms: EXW or FOB Novorossiysk; heavy line hardware moves economically by sea
  • Documents: GOST/EAC conformity, routine test certificates, installation guidance

Upload your bill of quantities or single-line diagram with a sourcing request to receive itemized factory quotations.

FAQ

Are these SPDs and breakers compatible with IEC-based installations?
Russian electrical standards are largely harmonized with IEC, so ratings, terminology and DIN-rail form factors will be familiar. SPDs are classified Type 1/2/3 as in IEC 61643. Still, confirm nominal voltage and frequency for your grid — most devices are built for 220/380 V 50 Hz networks, which matches most of Africa, the Middle East and Central Asia.
Can suppliers quote against a utility tender bill of quantities?
Yes, this is routine. Send the BOQ with item specifications and quantities; manufacturers return itemized pricing, technical datasheets and deviation lists where their product differs from the reference spec. For tenders requiring type-test reports from independent laboratories, ask early — gathering certified translations takes time.
What comes in a cathodic protection package for a pipeline project?
Typical scope includes transformer-rectifier stations, anode groundbeds, reference electrodes, test posts and cabling accessories. Suppliers can size the system if you provide pipeline length, coating type and soil resistivity data. Commissioning support is usually remote, with detailed installation documentation; on-site supervision is negotiable for large projects.
How are fragile porcelain insulators packed for sea freight?
Insulators ship in wooden crates with individual separators, a packing method refined over decades of export. Breakage allowances are specified in the contract — typically the supplier replaces transit-damaged units documented in a port survey report. Polymer insulators are lighter and far more tolerant of handling if logistics is a concern.
What are typical lead times and minimum orders?
Standard SPDs, insulators and grounding kits often ship from stock or within 2–3 weeks. Cathodic protection stations and custom relay panels are engineered to order — typically 45–60 days. Minimums are modest: one carton for small devices, one crate for insulators; full container loads earn better unit pricing.