Корпусҳои сипарӣ
Корпусҳои сипарии металлӣ
Қуттиҳои тақсимӣ
Кронштейнҳо
Қуттиҳои пластикӣ
Дастгоҳҳои воридотию тақсимотӣ
Қуттиҳои клеммӣ
Корпусҳои сипари ҳисобӣ
Лавозимоти сипарӣ
Қуттиҳои роҳ ва кабел
Шинопроводҳо
Изоляторҳо
Лавозимоти лоткҳо
Каналҳои кабелӣ
Корпусҳои хурдҳаҷм
Сарпӯши лоткҳо
Лоткҳои кабелии нардбонӣ
Лоткҳои кабелии рост
Лоткҳои кунҷӣ
Гардишҳои лоткҳо
Профилҳо ва ДИН-рейкаҳо
Дигар
Маҳсулот — Корпусҳо ва бастагуҳо
MKP82-N-24-41-10 Boks ShCHRN-P-24 moduli navesn.plastik IP41 PRIME
сом. 98.10-327
IEK Holding LLC 🇷🇺
MKP82-N-24-WD-41-10 Боки ЩРН-П-24 модул овезон пластик IP41 PRIME дари сафед
сом. 98.10-327
IEK Holding LLC 🇷🇺
MKP82-N-18-WD-41-10 Боки ЩРН-П-18 модул овезон пластик IP41 PRIME дари сафед
сом. 98.10-327
IEK Holding LLC 🇷🇺
Консоли носи SKO-000, бо андозаҳои габаритӣ аз 40x40x150 мм то 40x80x750 мм, бо ғафсии металл аз 1,5 мм то 2,5 мм, пӯлод
сом. 9.81-65.40
SZ EMI OJSC 🇷🇺
Плита кунҷи 90 дараҷа 2 сӯрохи SMA 621, бо андозаи умумии 40x48x50 мм, бо ғафсии металл 5,0 мм, пӯлоди зангногир
сом. 16.35-65.40
SZ EMI OJSC 🇷🇺
Plastina 2 obertash SMA 603, ba gabaritnomi 40x80 mm, ba tholshina metalla 5,0 mm, stal nershavae markai AISI 316L
сом. 16.35-65.40
SZ EMI OJSC 🇷🇺
Кронштейни опорӣ BSO 50-000, бо андозаҳои умумӣ аз 110х50х130 мм то 200х50х1030 мм, бо ғафсии металлӣ 2,5 мм, гор
сом. 32.70-327
SZ EMI OJSC 🇷🇺
Single Brace for Consoles SM-U 00, 40x300 to 40x500 mm, 3 mm Thick, Hot-Dip Galvanized
сом. 32.70-196.20
SZ EMI OJSC 🇷🇺
FAQ
•Can cabinets be produced in non-catalogue dimensions?
Yes, and with modest minimums — sheet-metal shops here treat custom sizes as ordinary work. Provide height, width, depth, IP rating, door and lock type, and required cutouts or mounting plates. Tooling charges are rare for standard bending and punching; a custom batch of 10–50 cabinets is normal, with drawings approved before production.
•What corrosion protection should I choose for coastal or humid sites?
For outdoor and coastal installation, choose hot-dip galvanising after fabrication for trays and fittings, or powder coating over zinc-primed steel for cabinets; stainless executions are available for the harshest sites. State the environment in your request — suppliers will recommend a finish and provide coating thickness measurements with the shipment.
•How is freight cost controlled for bulky but light cargo like trays?
Trays and covers nest inside each other and ship strapped in compact bundles, and many cabinet models travel flat-packed for on-site assembly. Suppliers calculate container utilisation before invoicing, so you see real cubic economics. As a rule, a 40-foot container absorbs a mid-sized commercial project's complete tray and enclosure schedule.
•Are enclosure IP ratings backed by test documents?
Yes. IP31 through IP65 ratings are confirmed by test protocols under the GOST 14254 standard, which is identical in method to IEC 60529. EAC declarations and test reports ship with the goods and are generally sufficient for project documentation and tender technical files in most importing countries.
•Do suppliers stock matching hardware — covers, partitions, connectors?
The system approach is standard: each tray family includes its covers, partitions, connectors, fasteners and brackets, and suppliers complete your bill of materials to avoid site mismatches. If you mix tray brands in an existing facility, send dimensions and the factory will confirm interface compatibility or supply adapter pieces.