المنتجات — أدوات المطبخ
وعاء ألمنيوم مصبوب بسعة 10 لتر مع طلاء غير لاصق، كوكمارا
SAR 56.25-157.50
ش.م مصنع كوكمور للمعادن 🇷🇺
قدر خزفي 4 لتر من الألمنيوم مع طلاء غير لاصق من كوكمارا، خط التقاليد
SAR 33.75-112.50
ش.م مصنع كوكمور للمعادن 🇷🇺
قدر ألمنيوم مصبوب بسعة 5.5 لتر مع طلاء غير لاصق من كوكمارا - خط تيتانيوم برو
SAR 33.75-112.50
ش.م مصنع كوكمور للمعادن 🇷🇺
وعاء ألمنيوم مصبوب بسعة 2.5 لتر مع طلاء غير لاصق - كوكمارا
SAR 33.75-112.50
ش.م مصنع كوكمور للمعادن 🇷🇺
قاعدة معدنية للشواء مع 5 أسياخ لقدر بسعة 9 لتر من كوكمارا
SAR 33.75-112.50
ش.م مصنع كوكمور للمعادن 🇷🇺
صينية خبز ألمنيوم مصبوبة غير لاصقة 400x295x50 مم - كوكمارا غرانيت ألترا
SAR 22.50-82.50
ش.م مصنع كوكمور للمعادن 🇷🇺
وعاء ألمنيوم سعة 12 لتر بدون طلاء من كوكمارا مع غطاء ألمنيوم
SAR 56.25-157.50
ش.م مصنع كوكمور للمعادن 🇷🇺
قدر أرز 3.5 لتر من الألمنيوم غير لاصق مع غطاء زجاجي - كوكمارا غرانيتي ألترا
SAR 33.75-112.50
ش.م مصنع كوكمور للمعادن 🇷🇺
قدر بلادي سعة 28 لتر (بدون طلاء) من الألمنيوم مع غطاء من الألمنيوم بواسطة كوكمارا
SAR 56.25-157.50
ش.م مصنع كوكمور للمعادن 🇷🇺
قدر مقلي ألمنيوم 3 لتر مع طلاء غير لاصق من كوكمارا، غطاء زجاجي، خط "التقاليد
SAR 33.75-112.50
ش.م مصنع كوكمور للمعادن 🇷🇺
مقلاة ألمنيوم مصبوبة 300/85مم كوكمارا مع غطاء زجاجي ومقابض باكليت
SAR 22.50-67.50
ش.م مصنع كوكمور للمعادن 🇷🇺
شواية فحم من الصلب مع عناصر مصنوعة من الحديد المطاوع
SAR 337.50-2,250
مؤسسة ИК-5 УФСИН РОССИИ ПО ПСКОВСКОЙ ОБЛАСТИ 🇷🇺
شواية باربكيو ثابتة خارجية بصلب 5 مم
SAR 562.50-2,025
مؤسسة ИК-5 УФСИН РОССИИ ПО ПСКОВСКОЙ ОБЛАСТИ 🇷🇺
صينية البط المصنوعة من الألمنيوم سعة 5.5 لتر مع غطاء من كوكمارا
SAR 33.75-112.50
ش.م مصنع كوكمور للمعادن 🇷🇺
قدر ألومنيوم مصبوب 1.5 لتر بدون طلاء من كوكمارا، مع مقبض باكليت قابل للإزالة
SAR 11.25-36
ش.م مصنع كوكمور للمعادن 🇷🇺
قدر أسطواني مزخرف بمقابض من الفولاذ المقاوم للصدأ، 1.5 لتر-5 لتر
SAR 11.25-67.50
ش.ذ.م.م ستاليمال 🇷🇺
مقلاة شواية مربعة 260x260 مم، ألمنيوم، مضادة للالتصاق، كوكمارا
SAR 22.50-90
ش.م مصنع كوكمور للمعادن 🇷🇺
الأسئلة الشائعة
•Are the non-stick coatings certified for food contact?
Yes, cookware ships with EAC conformity and food-contact declarations covering the coating and base metal. Manufacturers state the coating system, typically multi-layer non-stick on cast aluminium, in the product passport. If your market requires specific local certification, the factory provides composition data to support your filing.
•Does the cookware work on induction cooktops?
Selected lines carry a bonded steel induction base; standard cast aluminium without it works only on gas and electric. Catalogue listings mark induction compatibility per model, so state the share of induction product you need and the supplier will compose the assortment accordingly.
•What is the minimum order per model for wholesale pricing?
Typical factory minimums run from one carton per SKU, often 6-12 pieces depending on diameter, with meaningful wholesale pricing from mixed pallets. Distributors usually order an assortment matrix across diameters and lines; full container loads earn the deepest tier but are not required to start.
•Can products be packed under our own brand?
Yes, private label is common: your trademark on boxes, lid cards and care leaflets, with the factory's name retained on the casting where regulation requires origin marking. Minimums for branded packaging are higher than open-stock, typically from several hundred pieces per SKU, with two to three extra weeks of lead time.
•How is cookware shipped to minimize damage and cost?
Pans and pots nest with cardboard interleaving into compact master cartons, palletised and stretch-wrapped, which makes cookware one of the more freight-efficient housewares categories. Damage rates in sea and road transit are low; the main care point is keeping coated surfaces separated, which factory packing already addresses.