Тауарлар — Сантехника және құбыр арматурасы
High-Pressure Gate Valves up to 15.0 MPa (150 kgf/cm²)
₸1,425,000-11,400,000
TYAZHPROMAMMATURA OJSC 🇷🇺
Gate Valve for Steam Turbine Installations 1120-100-ЭМ
₸570,000-2,850,000
Energomash (Chekhov) - CZEM OJSC 🇷🇺
LD Pride Brass Ball Valve for Liquid and Gas Control, Model 47.20.V-N.R.GAS
₸1,425-5,700
LD PRIDE LLC 🇷🇺
Wall-Mounted Sink Spout with Built-in Valve and Ball Joint KR5444
₸7,125-22,800
Kopfgescheit LLC RUSSIA 🇷🇺
Decast VSKM-15 Water Meter for Cold and Hot Water (110 mm, with km/h and OK)
₸4,275-14,250
DECAST M LLC 🇷🇺
Slide Gate Valves DN 100-1200 PN up to 12.5 MPa (125 kg/cm²)
₸4,275,000-19,950,000
TYAZHPROMAMMATURA OJSC 🇷🇺
Decast VSKM-15 Water Meter for Cold and Hot Water Measurement with LoRaWAN 110mm
₸7,125-19,950
DEKAST LLC 🇷🇺
Gate Valve 1012-225-EM for Thermal Power Plants
₸213,750-855,000
Energomash (Chekhov) - CZEM OJSC 🇷🇺
FAQ
•Are Russian water meters accepted by utilities in other countries?
Meters ship with metrological passports and initial verification under EAEU rules, which most CIS and Central Asian utilities accept directly. Elsewhere, acceptance depends on your national metrology authority; manufacturers support type-approval by providing technical files and test units. Clarify the approval route before contracting large municipal volumes.
•What pressure and temperature ratings do the gate and ball valves carry?
Standard utility lines are rated PN10 to PN25 for water up to 90–150 degrees depending on seal material, with higher classes available for industrial series. Each valve carries its rating cast or stamped on the body, and batch test protocols confirm shell and seat tightness per GOST procedures that parallel EN 12266.
•Can meters and valves be branded for our utility or distribution network?
Yes. On volume orders, plants print the distributor or utility name on meter dials, mould it into valve bodies or add it to labels and passports. Typical thresholds start around 500–1,000 units per SKU. Branding does not change the certification, which continues to reference the manufacturing plant.
•What is a realistic lead time for a municipal tender volume?
Catalogue meters and valves in tender quantities — say 5,000–20,000 meters or several thousand valves — normally take 30–60 days in production, since plants schedule verification capacity in batches. Add 7–14 days trucking to Central Asia or 25–40 days sea freight to the Gulf and Africa. Plan tender delivery schedules around those windows.
•Do suppliers stock spare parts and repair kits?
Yes, and this is a practical advantage of the category: seal kits, stems, wedges and meter mechanisms remain in production for many years because domestic utilities demand them. Order repair kits as a percentage of the main batch — 5 percent is a common rule — to keep your service department independent.