Тауарлар — Кабельдер және сымдар

Бақылау кабелі KVVGEz-HL, 660 В

Бақылау кабелі KVVGEz-HL, 660 В

₸427.50-1,995
KAMSKY CABLE LLC 🇷🇺
Control Cables with Rubber and Plastic Insulation

Control Cables with Rubber and Plastic Insulation

₸199.50-1,425
KAMSKY CABLE LLC 🇷🇺
Бақылау кабелі КППГЭнг(А)-HF

Бақылау кабелі КППГЭнг(А)-HF

₸427.50-1,710
KAVKAZKABEL LLC 🇷🇺
Бақылау кабелі KVVGE-HL, 660 В

Бақылау кабелі KVVGE-HL, 660 В

₸285-2,850
KAMSKY CABLE LLC 🇷🇺
Бақылау кабелі КПБПнг(А)-FRHF 0,66 кВ

Бақылау кабелі КПБПнг(А)-FRHF 0,66 кВ

₸712.50-2,565
MARPOSADKABEL OJSC 🇷🇺
Бақылау кабельдері КВВГз

Бақылау кабельдері КВВГз

₸285-1,710
Samara Cable Company OJSC 🇷🇺
Бақылау кабельдері КПВГ-П

Бақылау кабельдері КПВГ-П

₸285-1,710
Samara Cable Company OJSC 🇷🇺
Бақылау кабелі KVVBG-XL, 660 В

Бақылау кабелі KVVBG-XL, 660 В

₸85.50-855
KAMSKY CABLE LLC 🇷🇺
Сигналдық кабельдер АКВВГнг(А)-ХЛ

Сигналдық кабельдер АКВВГнг(А)-ХЛ

₸427.50-1,710
Samara Cable Company OJSC 🇷🇺
Контрольный кабель КВБбШвнг(А)-ХЛ

Контрольный кабель КВБбШвнг(А)-ХЛ

₸427.50-1,710
KAVKAZKABEL TM OJSC 🇷🇺
Бақылау кабелі KVVGз-ХЛ 660 В

Бақылау кабелі KVVGз-ХЛ 660 В

₸427.50-1,995
KAMSKY CABLE LLC 🇷🇺
Бақылау кабельдері КВВБГ

Бақылау кабельдері КВВБГ

₸712.50-2,850
Samara Cable Company OJSC 🇷🇺
Бақылау кабелі АКППГнг(А)-HF

Бақылау кабелі АКППГнг(А)-HF

₸427.50-1,710
KAVKAZKABEL LLC 🇷🇺
Бақылау кабелі КППГнг(А)-FRHF

Бақылау кабелі КППГнг(А)-FRHF

₸570-2,850
KAVKAZKABEL LLC 🇷🇺
Бақылау кабелі, медь, 660 В

Бақылау кабелі, медь, 660 В

₸712.50-8,550
KAMSKY CABLE LLC 🇷🇺
Бақылау кабелі КВВГЭнг(А)-LS

Бақылау кабелі КВВГЭнг(А)-LS

₸570-2,850
KAVKAZKABEL LLC 🇷🇺
Бақылау кабелі АКПБПнг(А)-HF

Бақылау кабелі АКПБПнг(А)-HF

₸570-2,850
KAVKAZKABEL LLC 🇷🇺
Бақылау кабельдері АКПВГ

Бақылау кабельдері АКПВГ

₸427.50-1,710
Samara Cable Company OJSC 🇷🇺
Бақылау-өлшеу кабелі BiT RE

Бақылау-өлшеу кабелі BiT RE

₸427.50-2,850
REЖКАБЕЛЬ LLC 🇷🇺

FAQ

How do Russian cable types correspond to IEC designations?
Construction principles match: VVG corresponds to copper PVC-insulated power cable of the IEC 60502-1 type, AVBbShv to armoured aluminium cable, and SIP to aerial bundled conductor. Cross-sections follow the same square-millimetre series. Suppliers issue comparison sheets and full construction drawings so your engineers can approve equivalence against project specifications.
What is the minimum order — can I buy less than a full drum?
The drum is the practical unit: cutting opens a factory length and most plants avoid it for small remnants. However, plants will wind custom lengths to order — say, 12 drums of 350 metres to match your feeder runs — which is more useful than buying standard lengths and generating offcuts. Project lots start around 5–10 km total.
Are fire-rated and halogen-free executions available?
Yes. Most power and control families come in low-smoke halogen-free (ng-LS, ng-HF) and fire-resistant (FR) executions, tested for flame spread, smoke density and circuit integrity under fire. State the fire performance class your code requires and the plant will match it and attach the corresponding test protocols.
What documentation supports a utility tender submission?
Plants provide type test protocols, routine test certificates per drum, EAC conformity declarations, construction drawings and ISO 9001 factory certification. For medium voltage cable, partial discharge and voltage test records are included. This package normally satisfies tender technical files; specific national homologation, where required, is discussed case by case.
How is cable shipped and how long does it take?
Drums load into containers or open wagons; a 40-foot container carries roughly 15–25 tonnes of cable depending on drum sizes. Production of non-stock positions takes 2–5 weeks. Trucking to Central Asia adds 7–14 days; sea freight from Novorossiysk or St. Petersburg to the Gulf or East Africa runs 25–45 days.
Can conductors be supplied in aluminium to cut project cost?
Yes, and this is a major lever: aluminium low voltage cable, with 531 listings here, prices well below copper for distribution feeders where the larger cross-section is acceptable. Suppliers will recalculate your copper schedule into aluminium equivalents, showing the cross-section conversion and the cost difference per kilometre, so you can decide line by line.