Principle of construction of the receiving path
Direct digitisation of radio signals
ADC clock frequency
1.6...30
Receiving frequency range
1.6...30
Sampling frequency of the received signal in the receive/transmit mode
200
Types of modulation
LSB, USB, DSB, CW, AM, SAM, NFM, WFM
Sensitivity at bandwidth value (0.5 ± 0.1) kHz, nominal input impedance value of 50 and (signal+noise/noise ratio)
3.0E-7 ألف م³
Number of independent receiving channels
1 ميكروغراي
Number of affected frequencies with intrinsic noise level exceeding the intrinsic noise level in the band (100 ± 10) Hz by at le
10 ميكروغراي
Single-signal dynamic range in the band 500 Hz, not less, dB ±3dB
130
Selectivity of the receiver on side channels of reception in the frequency range 0,15 - 300 MHz, not less
Flat grinder, Specialised grinder
Two-signal selectivity at interference rejection at frequency ± (100 ± 1) kHz when measured in the filter band 3.1 kHz, not less
100
Internal oscillator instability, max (optional)
±0.5×10(-6) (±5×10(-8))
Built-in receiver preamplifier with gain settings
10
Principle of transmitter signal generation
Straight synthesis
Transmitted frequency range
2...30
Level of nonlinear combinational distortion of the signal at the output relative to the level of the main oscillation (when a tw
-30
Maximum power output
20 ±2 سم³
Operating temperature range
0...40 مليون م³
Limit reduced/increased temperature
– 40/+50 مليون م³
Dimensions (DxWxH)
185x170x60 مم
Weight, not more
2 م² مساحة سكنية
Supply voltage range
12...16 سم³
Maximum current consumption
5.0 ±0.5
Receiving frequency range
1,6-30
Analog-to-digital converter (ADC) bit rate
16
Connection type
Computer console