High shoe covers with tie fastening at the upper edge. If necessary, the shoe covers can be made with laminated double soles
375 mm high shoe covers with ties (see figure 7).
For the production of shoe covers are used:
- non-woven three-layer CMC material (spunbond/meltblown/spunbond) with a surface density of at least 50 g/m2
- threads - according to GOST 6309.
Raw materials and materials must meet safety requirements in accordance with the standards of GOST ISO 10993, GOST R 52770 series.
The parameters of the finished product should correspond to the dimensional characteristics (see figure 8).
The sole is stitched on the front side of the shoe on the upper edge of the sole at a distance of 0.2 - 0.3 cm from the cut. The frequency of stitching should be at least three stitches in one centimetre.
For use as a barrier means for protection against mechanical influences and harmful biological factors, in medical centres.
Tell us what you need and get quotes from verified suppliers