High-Density Coating Application System NIKA-15102 — LVT+ LLC

Name: High-Density Coating Application System NIKA-15102
Brand: NIKA
SKU: 235787
Availability: InStock

Brend: NIKA

so'm 1,134,000,000 - so'm 3,780,000,000 UZS

MOQ: 1 pieces

Asosiy xususiyatlar

Installed capacity: 91715 W

Maximum power consumption: no more than 100 kW

purpose: coating application system NIKA-15102 for high-density coatings, cutting tools, and plates with deposition rate of at least 1.9 µm/h, for low-temperature ion-plasma nitriding

dust and moisture protection: yes

Yetkazib beruvchi haqida ma'lumot

LVT+ LLC

🇷🇺 📦 🏭 🛡️

Barcha mahsulotlarni ko'rish (37)

Tezkor so'rov

Tavsif

The coating plant NIKA-15102 is equipped with four linear arc evaporators LDI, is designed for preparation and application of high density coatings (AlTiN, AlTiSiN,TiB2) for end tools and cutting inserts with deposition rate not less than 1.9 microns/h., ion-plasma low-temperature nitriding of workpiece surface, application of various coatings:

- hardening coatings: AlTiN, AlCrN, AlSiTiN, AlSiCrN;

- multiphase coatings: -TiN/nc-AlN, nc-TiAlN/a-Si3N4, etc;

- heat-resistant and heat-resistant coatings.

- surface nitriding

Coating methods and technologies: PVD, CVD, HiPIMS, CAE, CMS, PECVD, PN/C, PARNS, IPVD based on vacuum arc vaporisation (ARC) or similar method.

The unit realises the use of combined methods of sputtering by selecting interchangeable technological devices.

The operating manual is available on request.

Xususiyatlar

Installed capacity

91715 W

Maximum power consumption

no more than 100 kW

purpose

coating application system NIKA-15102 for high-density coatings, cutting tools, and plates with deposition rate of at least 1.9 µm/h, for low-temperature ion-plasma nitriding

dust and moisture protection

yes

Type of construction

stationary

Guaranteed lifetime of the plant

12 months from the date of signing the act of commissioning the installation

Warranty shelf life of the system

18 months from delivery date

Service life of the plant until decommissioning

5 years

Resources and service life of components and purchased products

determined according to their operational documents

Climatic designs

GOST 15150-69; GOST 15543-70 under normal values of climatic factors of the environment - UHL for placement category 4.2.

version

according to design documentation Coating application installation NIKA-15102

Power supply voltage

380(10±15%) V

Power supply connection diagram

TN-C (three-phase four-wire, neutral protective and neutral working conductors combined in one conductor)

Maximum current consumption by phase

138,96 A

Ultimate vacuum

no more than -0.0006

Chamber pressure 30 minutes after the start of pumping

not more than 0.005

Air flow after pumping the chamber for 30 min, ncm3/min

no more than 0.3

Maximum working temperature for heating workpieces

600 °C

Working gases

argon GOST 10157-2016, nitrogen GOST 9293-74, hydrogen GOST 3022-80, air

Number of gas supply channels

5 pcs

Pressure control range by gas flow

0,1-0,5

Working fluid (recommended)

distilled water, 20% ethanol solution in distilled water according to GOST 6709-72

Working fluid volume, l

no more than 15

Cooling water flow rate, m3/hour

no more than 1.5

Compressed air flow rate, m3/min

no more than 0.02 m3/min

Weight of the unit (excluding the forevacuum unit, cryogenic pump compressor unit, water recycling system,

no more than 2300 kg

Overall dimensions of the unit on the transport base (length x width x height)

not more than 2800 x 1230 x 2260 mm

O'xshash mahsulotlar