GAKS-I-3 Test Complex for Safety Valve Calibration — REMARM LLC

Name: GAKS-I-3 Test Complex for Safety Valve Calibration
Brand: REMARM
SKU: 374258
Availability: InStock

Brend: REMARM

so'm 37,800,000 - so'm 226,800,000 UZS

MOQ: 1 sets

Asosiy xususiyatlar

Applicable methods of inspection for valve actuation pressure setting.: acoustic (pop) and manometric (moment of valve opening)

Range of use by DN and ?N (or adjustment pressure ??). Stand with manual clamping of inlet flange GAKS-I-31-4/50S: DN 4...50 mm; Pn 1.0...30.0 MPa

Range of use by DN and ?N (or adjustment pressure ??). Stand with manual clamping of inlet flange AKS-I-31-50/300C: DN 50...300 mm; PN 1.6...16.0 MPa

Range of use by DN and Pn (or setting pressure Rn). Stand with pneumatic drive of input flange clamping GAKS-I-32: DN 50...150 mm; PN 1.6...16.0 MPa

Yetkazib beruvchi haqida ma'lumot

REMARM LLC

🇷🇺 📦 🏭 🛡️

Barcha mahsulotlarni ko'rish (66)

Tezkor so'rov

Yana shu brenddan REMARM

Specialized Technological Equipment for GAKS-L-4 Lathes

so'm 22,680,000-so'm 105,840,000

Pneumatic Control Pump Station Type GAKS-D-7

so'm 113,400,000-so'm 378,000,000

Pneumatic and Hydraulic Testing Stands GAKS-I

so'm 60,480,000-so'm 378,000,000

Cork Valve Lapping Machines GAKS-50/200S

so'm 22,680,000-so'm 75,600,000

Portable Gas-Oxygen Cutting Machines for Pipes GAKS-R (Track, Krot)

so'm 22,680,000-so'm 105,840,000

Hydraulic Hand Pumps GAKS-D (NRG) for Pressure Testing

so'm 1,890,000-so'm 6,804,000

Dual-Circuit Pneumatic Control Pump Stations GAKS-D-5

so'm 37,800,000-so'm 226,800,000

Tavsif

Testing complex type GAKS-I-3 is used for testing in the production and repair of safety valves and is designed to adjust (tare) valves to the actuation pressure and to test them for tightness of the gate. The complex includes a test bench with a control panel and a compressor unit, the compressor of which has the ability to adjust the compressor to the required indicators.

The pneumatic control panel supplies and regulates the compressed air pressure to the test bench. Adjustment of safety valves on the stands is carried out with compressed air, tests for tightness of the gate with compressed air and technical water.

Clamping the inlet flange of the valve on the bench - manual or mechanised drive. Accuracy of measurement and logging of test results is achieved by using electronic device "SEITRONIC SIR-PG10-1" or automated electronic system "SEITRONIC SIR-PG".

Xususiyatlar

Applicable methods of inspection for valve actuation pressure setting.

acoustic (pop) and manometric (moment of valve opening)

Range of use by DN and ?N (or adjustment pressure ??). Stand with manual clamping of inlet flange GAKS-I-31-4/50S

DN 4...50 mm; Pn 1.0...30.0 MPa

Range of use by DN and ?N (or adjustment pressure ??). Stand with manual clamping of inlet flange AKS-I-31-50/300C

DN 50...300 mm; PN 1.6...16.0 MPa

Range of use by DN and Pn (or setting pressure Rn). Stand with pneumatic drive of input flange clamping GAKS-I-32

DN 50...150 mm; PN 1.6...16.0 MPa

Range of use by DN and ?N (or adjustment pressure ??). Stand with pneumatic actuator of input flange clamping GAKS-I-33

DN 50...200 mm; PN 1.6...16.0 MPa

Range of use by DN and ?N (or adjustment pressure ??). Stand with pneumatic actuator of input flange clamping GAKS-I-34

DN 50...300 mm; PN 1.0...16.0 MPa

Range of use by DN and ?N (or setting pressure ??). Stand with hydraulic drive of inlet flange clamping GAKS-I-3-

DN 25...150 mm; Pn 0.6...40.0 MPa

Range of use by DN and ?N (or setting pressure ??). Stand with hydraulic drive of inlet flange clamping GAKS-I-3-

DN 10...300 mm; Pn 1.0...20.0 MPa; DN 400 mm; Pn 1.0...2.5 MPa

Range of use by DN and ?N (or setting pressure ??). Stand with hydraulic drive of inlet flange clamping GAKS-I-3-

DN 50...300 mm; Pn 1.0...10.0 MPa; DN 400 mm; Pn 1.0...2.5 MPa

Applicable methods of control in tests for tightness of gates

visually or with a bubble chamber (by the volume of leaks)

O'xshash mahsulotlar