Mahsulotlar — Furnitura va aksessuarlar
Kitchen Cabinet Facade 500mm (White Gloss/Black) – Sherwood LD.281630.000
so'm 189,000-604,800
ALMAZ LLC 🇷🇺
Facade Set for Two-Door Cabinet (White/Blue) Model: ЛД.522040.000
so'm 756,000-2,772,000
ALMAZ LLC 🇷🇺
Sherwood Kitchen Cabinet Front 400mm Luxury 3 Drawers Set (White Gloss/Black)
so'm 264,600-756,000
ALMAZ LLC 🇷🇺
Perforated Double Door for LINEA N 33U Cabinet 600mm LN35-33U6X-D2P
so'm 1,134,000-3,780,000
IEK Holding LLC 🇷🇺
High Glass Facade Door 450 - Italy Model LD.275480.000 (Light Oak)
so'm 1,134,000-3,780,000
ALMAZ LLC 🇷🇺
Perforated Double Door for LINEA N 18U Cabinet 600mm LN05-18U6X-D2P
so'm 1,134,000-3,780,000
IEK Holding LLC 🇷🇺
Kitchen Cabinet Facade Set 500 with 2 Drawers (Mokka LD.274120.000 - Kashmir)
so'm 189,000-604,800
ALMAZ LLC 🇷🇺
Direct countertop 2000x600x38 LD 292.138.200 (8044 Hexastone R)
so'm 1,134,000-3,780,000
ALMAZ LLC 🇷🇺
Decorative Bed Element Set in White Shagreen - Model LD.524200.000
so'm 113,400-453,600
ALMAZ LLC 🇷🇺
Corner Cabinet Facade Set in White/Blue - Model Modex-2 LD.522050.000
so'm 1,134,000-3,780,000
ALMAZ LLC 🇷🇺
Horizontal Facade Door 800 in Textured White Oak - Marina LD.273330.000
so'm 189,000-604,800
ALMAZ LLC 🇷🇺
FAQ
•Can fronts and panels be cut to our own dimensions?
Yes, made-to-measure is the normal working mode for Russian component mills. You send a cutting list with dimensions, decor and edge-banding scheme, and the mill produces to order. Typical production time is 15-30 days depending on the decor and film availability, plus transit.
•Which materials are these components made from?
The bulk is laminated particleboard and MDF, including painted, PVC-film and acrylic finishes for fronts. Countertops are usually moisture-resistant particleboard with HPL plastic, and some suppliers offer solid wood or birch plywood elements. Material certificates and formaldehyde emission class are stated in the product passport on request.
•How do you prevent damage to panels during sea or road freight?
Components travel on pallets with cardboard interleaving, foam corner protection and stretch film, sometimes in plywood crates for glossy fronts. Mills that export regularly pack with overland vibration in mind. Claims for transit damage are handled through the carrier's insurance, so photographing the cargo on arrival is recommended.
•Is there a minimum order for custom components?
Most mills accept trial orders from a single pallet, roughly 20-40 fronts or several countertops. Cut-to-size work below that volume is usually uneconomic once freight is added. For ongoing supply, buyers typically consolidate monthly truckloads combining fronts, panels and fittings from one or two mills.
•Can we get samples of decors and edge banding before ordering?
Yes. Suppliers normally send decor swatches and small panel samples by courier; the buyer covers shipping. This is strongly recommended, because laminate decors look different in print than in person, and matching an existing furniture line requires physical comparison.