Ապրանքներ — Կահույքի պարագաներ և բաղադրիչներ
Ameli LD.251710.000 Left High Cabinet Door Set with Oven (Provence Oak)
֏34,830-116,100
ALMAZ LLC 🇷🇺
Oliver LD.524060.000 M Bookshelf Front with Drawers Set (Golden Oak/White)
֏16,254-58,050
ALMAZ LLC 🇷🇺
LINEA F Series Racks for Telecommunication and Electrical Equipment
֏34,830-139,320
IEK Holding LLC 🇷🇺
Horizontal Cabinet Front Panel 800mm (Set) - White Gloss - Sherwood LD.281390.000
֏5,805-18,576
ALMAZ LLC 🇷🇺
Stability Element 90 Internal (1 Section, 1 Level) Assembly (2100, 2700, Orange Paint 2004, 200)
֏5,805-16,254
MEDVED LLC 🇷🇺
ESD Monitor Mounting Accessory for Perforated Panels - UNIVERSAL
֏580.50-2,322
UNIVERSAL PRIBOR LLC 🇷🇺
Kitchen Cabinet Facade Set with 2 Drawers 500mm in Kashmir – Model LD.274120.000
֏3,483-13,932
ALMAZ LLC 🇷🇺
FAQ
•Can fronts and panels be cut to our own dimensions?
Yes, made-to-measure is the normal working mode for Russian component mills. You send a cutting list with dimensions, decor and edge-banding scheme, and the mill produces to order. Typical production time is 15-30 days depending on the decor and film availability, plus transit.
•Which materials are these components made from?
The bulk is laminated particleboard and MDF, including painted, PVC-film and acrylic finishes for fronts. Countertops are usually moisture-resistant particleboard with HPL plastic, and some suppliers offer solid wood or birch plywood elements. Material certificates and formaldehyde emission class are stated in the product passport on request.
•How do you prevent damage to panels during sea or road freight?
Components travel on pallets with cardboard interleaving, foam corner protection and stretch film, sometimes in plywood crates for glossy fronts. Mills that export regularly pack with overland vibration in mind. Claims for transit damage are handled through the carrier's insurance, so photographing the cargo on arrival is recommended.
•Is there a minimum order for custom components?
Most mills accept trial orders from a single pallet, roughly 20-40 fronts or several countertops. Cut-to-size work below that volume is usually uneconomic once freight is added. For ongoing supply, buyers typically consolidate monthly truckloads combining fronts, panels and fittings from one or two mills.
•Can we get samples of decors and edge banding before ordering?
Yes. Suppliers normally send decor swatches and small panel samples by courier; the buyer covers shipping. This is strongly recommended, because laminate decors look different in print than in person, and matching an existing furniture line requires physical comparison.