نظام تأريض الأنود تحت السطح AZ.PTM مع عنصر بوليمر موصل PAV.PTM.P1
US$90-360
Material:
The working element of graphite-filled polymer is made of oil and gas resistant electrically conductive material. The mass fraction of electrically conductive filler should be not less than 40%
Material:
The working element of graphite-filled polymer is made of oil and gas resistant electrically conductive material. The mass fraction of electrically conductive filler should be not less than 40%
ش.ذ.م.م برومتيخمستر 🇷🇺
أنود تأريض عميق AZ.PTM مع عنصر مغناطيسي مجموعة GAZ.PTM.M.K
US$90-600
Material:
Chemical composition of working element from magnetite: mass fraction of iron oxide FeO - from 28 to 32 %; mass fraction of trivalent iron oxide Fe2O3 - from 56 to 64 %; Total fraction of impurities - not more than 12 %.
Material:
Chemical composition of working element from magnetite: mass fraction of iron oxide FeO - from 28 to 32 %; mass fraction of trivalent iron oxide Fe2O3 - from 56 to 64 %; Total fraction of impurities - not more than 12 %.
ش.ذ.م.م برومتيخمستر 🇷🇺
أنظمة التأريض الأنودية AZ-TES بعنصر بوليمر مشبع بالكربون، تحت السطح
US$30-180
Width:
125
Climatic version:
Type of climatic version O of placement category 5 according to GOST 15150 for ambient temperature from minus 20 C to plus 60 C
ش.ذ.م.م تِخْإِنِرْغُوسْنَابْ 🇷🇺
مجموعة تأريض أنود المغنيتيت العميق "مندلوييفيتس"-MTKG
US$90-360
Material of manufacture:
Magnetite
Material of manufacture:
Magnetite
ش.م.م خيمسيرفيس 🇷🇺
قضيب تأريض تحت السطح من الفيروسيليكون "مندلييفيتس"-MM(23)
US$9-36
Material of manufacture:
ferrosilide
Material of manufacture:
ferrosilide
ش.م.م خيمسيرفيس 🇷🇺
نظام تأريض الأنود العميق AZ.PTM بطبقة أكسيد التيتانيوم
US$90-600
Material:
titanium coated with mixed metal oxides
Material:
titanium coated with mixed metal oxides
ش.ذ.م.م برومتيخمستر 🇷🇺
نظام التأريض الأنودي البوليمري الكامل "قوس قزح" (AZP-RA-K)
US$90-300
Maximum current load per electrode:
5,0
Rated current load per electrode:
3,0
ش.ذ.م.م مصنع المعدات النفطية والغازية أنود 🇷🇺
قضيب تأريض أنود منخفض الذوبان "مندلييفيتس"-MRG
US$300-1,800
Material of manufacture:
Chemical resistant material (titanium, niobium, tantalum) with MMO coating
Material of manufacture:
Chemical resistant material (titanium, niobium, tantalum) with MMO coating
ش.م.م خيمسيرفيس 🇷🇺
مجموعة تأريض أنودي من الفيروسيليكون «مندليف» - MKG
US$90-360
Material of manufacture:
ferrosilide
Material of manufacture:
ferrosilide
ش.م.م خيمسيرفيس 🇷🇺
نظام تأريض أنودي عميق AZ.PTM بعنصر عمل من التيتانيوم
US$150-540
Length:
1800
Material:
Mixed metal oxide coated titanium complete
ش.ذ.م.م برومتيخمستر 🇷🇺
قضبان تأريض أنودية تحت السطح AZ-TES مع إلكترود من التيتانيوم وطلاء MMO، قطر 25 مم
US$30-120
Diameter:
25
Climatic version:
Type of climatic version O of placement category 5 according to GOST 15150 for ambient temperature from minus 20 C to plus 60 C
ش.ذ.م.م تِخْإِنِرْغُوسْنَابْ 🇷🇺
نظام التأريض الأنودي البوليمري "قوس قزح" AZP-RA
US$90-300
Maximum current load per electrode:
5,0
Rated current load per electrode:
3,0
ش.ذ.م.م مصنع المعدات النفطية والغازية أنود 🇷🇺
انشر طلب الشراء الخاص بك
احصل على عروض من موردين موثوقين
وفر وقتك
القطب الأرضي الفيروسيليكوني АЗ.СК.ФС
US$90-300
Length:
1455...1510
Material:
Electrically conductive sheet material
ش.ذ.م.م سويوزكومبليكت 🇷🇺
زازيمليتر أنود مغنتيتي عميق "مندلييفيتس"-MTG
US$90-360
Type:
Magnetite deep anodic earthing electrode
Type:
Magnetite deep anodic earthing electrode
ش.م.م خيمسيرفيس 🇷🇺
قضيب تأريض أنود بوليمر "رادوجا" (AZP-RA-G)
US$90-300
Maximum current load per electrode:
5,0
Rated current load per electrode:
3,0
ش.ذ.م.م مصنع المعدات النفطية والغازية أنود 🇷🇺
نظام التأريض الأنودي تحت السطح "مندليف" - MK(23)
US$90-300
Material of manufacture:
ferrosilide
Material of manufacture:
ferrosilide
ش.م.م خيمسيرفيس 🇷🇺
أقطاب تأريض أنودية AZ-TES مع إلكترود عمل من الفيروسيليكون
US$30-120
Section:
65
Climatic version:
Type of climatic version O of placement category 5 according to GOST 15150 for ambient temperature from minus 20 C to plus 60 C
ش.ذ.م.م تِخْإِنِرْغُوسْنَابْ 🇷🇺
أنود أرضي سطحي من الفيروسيليكون نوع PAZ.PTM.F
US$9-36
Working element length:
1300
Material:
Ferrosilide: cast iron grade CS15
ش.ذ.م.م برومتيخمستر 🇷🇺
زازيمليتير أنود فيروسيلكوني تحت السطح "مندليفيس"-م م (43)
US$9-36
Nominal electrode weight:
43
Material of manufacture:
ferrosilide
ش.م.م خيمسيرفيس 🇷🇺
قضيب تأريض أنود فيروسيليكوني عميق "مندلييفيتس"-MGB
US$90-360
Material of manufacture:
Ferrosilide of CS 15 grade according to GOST 7769
Material of manufacture:
Ferrosilide of CS 15 grade according to GOST 7769
ش.م.م خيمسيرفيس 🇷🇺
نظام تأريض الأنود على أساس الفيروسيليكون "قوس قزح" (AZF-RA)
US$9-36
Rated current load per operating element:
1,6; 2,0; 3,0
Maximum current load per workcell:
3,9; 5,0; 8,0
ش.ذ.م.م مصنع المعدات النفطية والغازية أنود 🇷🇺
نظام تأريض الأنود البوليمري AZP.PTM.G.K. للتأريض العميق
US$90-360
Material of the working element:
Carbon-polymer working element is a composition of graphite and phenol-formaldehyde resin. The mass fraction of graphite should be 80-85%.
Material of the working element:
Carbon-polymer working element is a composition of graphite and phenol-formaldehyde resin. The mass fraction of graphite should be 80-85%.
ش.ذ.م.م برومتيخمستر 🇷🇺
جهاز تأريض الأنود البوليمري نوع "راديو" (AZP-RA-U)
US$90-300
Maximum current load per electrode:
5,0
Rated current load per electrode:
3,0
ش.ذ.م.م مصنع المعدات النفطية والغازية أنود 🇷🇺
أقطاب التأريض الأنودية العميقة من الفيروسيليكون "مندليفيس"-م ج
US$150-480
Material of manufacture:
ferrosilide
Material of manufacture:
ferrosilide
ش.م.م خيمسيرفيس 🇷🇺
نظام تأريض الأنود الفيروسيليكوني AZF.PTM.G.K
US$150-480
Material of the working element:
Ferrosilide: cast iron grade CS15
Material of the working element:
Ferrosilide: cast iron grade CS15
ش.ذ.م.م برومتيخمستر 🇷🇺
أداة تأريض أنود بوليمري لتأريض السطح نوع AZP.PTM.P
US$9-60
Material:
Carbon-polymer working element is a composition of graphite and phenol-formaldehyde resin. The mass fraction of graphite should be 80-85%.
Material:
Carbon-polymer working element is a composition of graphite and phenol-formaldehyde resin. The mass fraction of graphite should be 80-85%.
ش.ذ.م.م برومتيخمستر 🇷🇺
أنظمة التأريض الأنودية الكاملة AZ "ديلا
US$300-1,800
Weight:
42
Service life, at least:
30
ش.م ديلان 🇷🇺
قضيب تأريض "ببيبرون
US$30-180
Design options:
Horizontal
The standard length of the electrode produced by the manufacturer is as follows:
1...6
ش.ذ.م.م بيبرون 🇷🇺
قضيب تأريض أنود مغنتيتي تحت السطح "مندليف" - مTP
US$90-300
Material of manufacture:
Magnetite
Material of manufacture:
Magnetite
ش.م.م خيمسيرفيس 🇷🇺
قطب تأريض أنودي فيروسيليكوني للتأريض السطحي AZF.PTM.P
US$9-36
Length:
1300
Material:
Ferrosilide: cast iron grade CS15
ش.ذ.م.م برومتيخمستر 🇷🇺
أقطاب تأريض أنودية عميقة من الفيروسيليكون نوع GAZ.PTM.F
US$90-300
Working element length:
1300
Material:
Ferrosilide: cast iron grade CS15
ش.ذ.م.م برومتيخمستر 🇷🇺
نظام تأريض الأنود البوليميري للتأريض السطحي AZP.PTM.P.K
US$90-360
Material of manufacture:
Carbon-polymer working element is a composition of graphite and phenol-formaldehyde resin. The mass fraction of graphite should be 80-85%.
Material of manufacture:
Carbon-polymer working element is a composition of graphite and phenol-formaldehyde resin. The mass fraction of graphite should be 80-85%.
ش.ذ.م.م برومتيخمستر 🇷🇺
قضيب تأريض أنودي عميق AZ.PTM مع عنصر مغنتيت GAZ.PTM.M
US$90-360
Material:
Chemical composition of working element from magnetite: mass fraction of iron oxide FeO - from 28 to 32 %; mass fraction of trivalent iron oxide Fe2O3 - from 56 to 64 %; Total fraction of impurities - not more than 12 %.
Material:
Chemical composition of working element from magnetite: mass fraction of iron oxide FeO - from 28 to 32 %; mass fraction of trivalent iron oxide Fe2O3 - from 56 to 64 %; Total fraction of impurities - not more than 12 %.
ش.ذ.م.م برومتيخمستر 🇷🇺
أقطاب التأريض الأنودية AZ-TES
US$90-300
Climatic version:
Type of climatic version O of placement category 5 according to GOST 15150 for ambient temperature from minus 20 C to plus 60 C
Service life, at least:
30 years
ش.ذ.م.م تِخْإِنِرْغُوسْنَابْ 🇷🇺
قضيب تأريض أنودي بوليمري "رادوجا" عميق مقطع (AZP-RA-GS)
US$90-300
Maximum current load:
5,0
Number of electrodes per section:
4
ش.ذ.م.م مصنع المعدات النفطية والغازية أنود 🇷🇺
نظام التأريض الأنودي البوليمري "قوس قزح"، نوع سطحي مقطع (AZP-RA-PS)
US$90-300
Maximum current load per electrode:
5,0
Rated current load per electrode:
3,0
ش.ذ.م.م مصنع المعدات النفطية والغازية أنود 🇷🇺
الكاثود الكهربائي ER-6 T2US 25 90
US$1.20-6
Nominal core cross-section:
25
Material:
heat resistant with double layer coating
ش.ذ.م.م دونكابيل 🇷🇺
نظام التأريض الأنودي تحت السطح AZ.PTM بعنصر بوليمر موصل PZ.PT
US$30-180
Material:
The working element of AZ made of carbon plastic (P) is a composition of graphite and thermosetting resin. The mass fraction of graphite should be at least 80%.
Material:
The working element of AZ made of carbon plastic (P) is a composition of graphite and thermosetting resin. The mass fraction of graphite should be at least 80%.
ش.ذ.م.م برومتيخمستر 🇷🇺
أنود تأريض فيرونيكلي للتأريض العميق AЗФ.ПТМ.Г
US$90-360
Type:
Anodic earthing electrode type AZF.PTM.G
Type:
Anodic earthing electrode type AZF.PTM.G
ش.ذ.م.م برومتيخمستر 🇷🇺
قضبان تأريض أنودية عميقة AZ-TS مع إلكترود تيتانيوم بطلاء MMO، قطر 25 مم
US$90-300
Climatic version:
Type of climatic version O of placement category 5 according to GOST 15150 for ambient temperature from minus 20 C to plus 60 C
Service life, at least:
30 years
ش.ذ.م.م تِخْإِنِرْغُوسْنَابْ 🇷🇺
نظام التأريض الأنودي تحت السطح AZ.PTM مع عنصر الحديد السليكوني PAZ.PTM.F.K
US$90-360
Length:
1500
Material:
Ferrosilide: cast iron grade CS15
ش.ذ.م.م برومتيخمستر 🇷🇺
أنود التأريض الفيروسيليكوني AZ.SK.FS-GB-1500
US$90-300
Electrode length (working element):
1500
Rated current load on the earthing switch:
2.3
ش.ذ.م.م سويوزكومبليكت 🇷🇺
قطب تأريض أنودي بوليمري للتأريض العميق نوع أЗП.ПТМ.Г
US$90-360
Type:
Anodic earthing electrode polymer type AZP.PTM.G
Type:
Anodic earthing electrode polymer type AZP.PTM.G
ش.ذ.م.م برومتيخمستر 🇷🇺
نظام التأريض العميق الأنودي AZ.PTM مع عنصر بوليمر موصل GAZ.PTM
US$90-360
Material:
The working element of graphite-filled polymer is made of oil and gas resistant electrically conductive material. The mass fraction of electrically conductive filler should be not less than 40%
Material:
The working element of graphite-filled polymer is made of oil and gas resistant electrically conductive material. The mass fraction of electrically conductive filler should be not less than 40%
ش.ذ.م.م برومتيخمستر 🇷🇺
القطب ER-6 T 10 36 لحماية الكاثود
US$30-180
Nominal core cross-section:
10
Nominal outer diameter of the module wire:
NZ-150-14,5
ش.ذ.م.م دونكابيل 🇷🇺
نظام تأريض أنود فيروسيليكون لحماية الكاثود" (AZF-RA)
US$90-360
ش.ذ.م.م مصنع المعدات النفطية والغازية أنود 🇷🇺
أنود أرضي عميق إيلغاز-5-غاز
US$90-600
Material of working and current-carrying shells:
Elastomer
Climatic version during operation:
B5 (for water)
ش.ذ.م.م إنيرغوفينستروي 🇷🇺